UPCOMING: Events

Page 5 of 5 FirstFirst ... 345
Results 41 to 46 of 46

Thread: WTB RO System

  1. #41
    Join Date
    03-03-2010
    Location
    San Antonio,TX
    Posts
    261

    Default

    Quote Originally Posted by BBQHILLBILLY View Post
    Heres a blue pic in climate controlled closet. My drain goes to a loquat tree, which is gettin BIG. The bigger the ro/di system is a wise investment.
    also get one you can flush your membrane. Those are expensive.
    Ok by flush your membrane do u mean one that has an RO flush value right

  2. #42
    Join Date
    05-19-2010
    Location
    Bandera and Eckhert
    Posts
    4,645

    Default

    it helps clean the membrane; it flushes it and sends the waste down the bad water line
    happy reefing
    Lets ride

  3. #43
    Join Date
    03-03-2010
    Location
    San Antonio,TX
    Posts
    261

    Default

    O ok

  4. #44
    Join Date
    05-19-2010
    Location
    Bandera and Eckhert
    Posts
    4,645

    Default

    LOL It sounds good. May have to call to get specifics. I would also call to get specifics on your membrane warranty. In case it goes bad. They can get pricey.
    happy reefing
    Lets ride

  5. #45
    Join Date
    03-13-2009
    Location
    doesnt matter
    Posts
    7,459

    Default WTB RO System

    Quote Originally Posted by BBQHILLBILLY View Post
    The portable tds meters are ez. You put some water in a small cup. You put the meter in it and it gives you a reading. Its that ez.You have to push a button. Thats it.
    you might want to calibrate your Tds meter BBQ just to be sure I had one that after a year went bad on me. I run the digital now

    Last edited by Big_Pun; Thu, 4th Apr 2013 at 06:04 PM.
    REEF MAFIA
    "TEFLON DON"

  6. #46
    Join Date
    03-03-2010
    Location
    San Antonio,TX
    Posts
    261

    Default

    Quote Originally Posted by Big_Pun View Post
    i just did and went with a brs 6 stage mostly cause i like not having to dump as much DI, even when the first canister of di is almost done its still pulling some out so the second finishes it off, then i replace the exhusted one and rotate them. so the first one gets new di, second on gets bumped to first position and new one is on the end now( if that makes sense). i monitor pressure levels as it drops i know pre filters are done, i also watch tds coming out membrane when tds goes up i replace it. just make sure you get a kit with pressure gauge and inline dual tds meter. also i can show you how to make your di last longer by purging tds creep.

    Man that is good stuff to know thanks again Big Pun. Hay do u have any pics of your system cause I see pic of systems with 2 white filters on top but only count 5 filters is one hidden some where?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •