I'm testing around 380. I've done the test twice using a salifert test kit and reef crystals. Any run into the same problems? Or any advice
I'm testing around 380. I've done the test twice using a salifert test kit and reef crystals. Any run into the same problems? Or any advice
-stephen
Aqueon 125 dual overflow, ADHI 30 refugium, 3x Hydra 52, Curve 7 skimmer, 2x Phosban 150 ( Carbon and bio pellets). Custom built 40 in tall stand and floating canopy for lights.
http://www.maast.org/showthread.php?...ini-mixed-reef
http://forum.reefangel.com/status/ba...id=slm222&t=-5
http://forum.reefangel.com/status/ba...id=slm222&t=-5
Are you sure its not Calcium that you testing?
Reefing is just like cooking, all the ingredients have to be just right , except you don't have to bring the water to a BOIL...
Positive. My calcium test is API. That and every bottle says Mg on it
-stephen
Aqueon 125 dual overflow, ADHI 30 refugium, 3x Hydra 52, Curve 7 skimmer, 2x Phosban 150 ( Carbon and bio pellets). Custom built 40 in tall stand and floating canopy for lights.
http://www.maast.org/showthread.php?...ini-mixed-reef
http://forum.reefangel.com/status/ba...id=slm222&t=-5
http://forum.reefangel.com/status/ba...id=slm222&t=-5
How often are you changing your water? Most mg problems are avoided with regular water changes. If your system isn't too large I'd recommend a 50% water change to correct your problem.
I refuse to join any club that would have me as a member.
Groucho Marx
I do water changes weekly currently. I found the problem. One of the pieces.. The dropper was letting out a bigger drop at a time from not being sealed properly. I reseated it and got a better answer, still low, but not crazy. It's about 1260. I'm going to start dosing with brs 2 part and mag
-stephen
Aqueon 125 dual overflow, ADHI 30 refugium, 3x Hydra 52, Curve 7 skimmer, 2x Phosban 150 ( Carbon and bio pellets). Custom built 40 in tall stand and floating canopy for lights.
http://www.maast.org/showthread.php?...ini-mixed-reef
http://forum.reefangel.com/status/ba...id=slm222&t=-5
http://forum.reefangel.com/status/ba...id=slm222&t=-5
Thank y'all for your quick replies
-stephen
Aqueon 125 dual overflow, ADHI 30 refugium, 3x Hydra 52, Curve 7 skimmer, 2x Phosban 150 ( Carbon and bio pellets). Custom built 40 in tall stand and floating canopy for lights.
http://www.maast.org/showthread.php?...ini-mixed-reef
http://forum.reefangel.com/status/ba...id=slm222&t=-5
http://forum.reefangel.com/status/ba...id=slm222&t=-5
That sounds more accurate. I'd try to get it up to about 1350-1400ppm. I use BRS 2-part, but will be moving to Tech-M for mag supplementing after I'm out.
-You had me at PWM
That's good news Stephen. I always tell folks to re-test with another kit before doing something drastic.
Bill
215g FOWLR... and anemones, GSP, gorgonians... carp, that isn't FO!
"I killed my first SW Fish in 1971..."
appreciate it! I decided to check source saltwater and tank again and paid closer attention and found the problem. I have BRS 2 part coming in soon. Been using kent tech-m without much results.
-stephen
Aqueon 125 dual overflow, ADHI 30 refugium, 3x Hydra 52, Curve 7 skimmer, 2x Phosban 150 ( Carbon and bio pellets). Custom built 40 in tall stand and floating canopy for lights.
http://www.maast.org/showthread.php?...ini-mixed-reef
http://forum.reefangel.com/status/ba...id=slm222&t=-5
http://forum.reefangel.com/status/ba...id=slm222&t=-5