Thoughts and ideas

[CoryDude]

Sorry, I was talking about the space between the side of the tank and fish room wall. Because I only have about 8 inches between each side, it's always difficult to clean the glass on the sides of the tank. Basically I can only access the tank from the back. It would be a lot easier if I could work on the tank on the sides and the back. With a room of your size you should be fine.

[fuzzybob4]

Ahh yeah I want to place odors in the front so that I can work on the front of the aquarium.

[fuzzybob4]

image.jpg
Im wanting to set up the aquarium like this since the aquarium will be a 6 X6 or 6 x5 foot print. But I can't find any thing about this aquarium other than the aquarium is no longer running.

[fuzzybob4]

Bump

[slm222]

where are you going to pck up a tank that big and whose building it?

[fuzzybob4]

I'm thinking about taking apart 2x 130 gallon aquariums and than put the front and back sides for the aquarium it's self.

[fuzzybob4]

I found one place that would build it but it would be 10,000 dollars that's crazy!

[EpicWin]

One interesting idea I have seen on r2r is a tank with only 1 glass side. The others are plywood with a special paint. Supposedly it cuts cost by a massive amount. Just throwing it out there.

[fuzzybob4]

Yeah I have looked into that but it's going to be in my fish room/ in wall so inwantto at least see into the aquarium from 3 sides

[fuzzybob4]

Does anyone know how to import the aquariums from google sketchup into a single photo?