Di resin turns brown after first use...(BRS)

[350gt]

im lost.......

keep in mind... I dont usually wake up until 10....

[Big_Pun]

if your getting high number after membrane either it's not seated right or it's shot...

[Big_Pun]

did you disconnect the line from the RO membrane and check water coming out it... the line that goes from membrane to the DI resin... sounds like you testing waste water

[alton]

I made the mistake of moving my Ro system in the garage this summer and my membrane did not last long. I have since moved it back inside the washroom

[350gt]

After membrane?



Before membrane

[350gt]

Is this thing even tube up correctly? Something seems wrong..


I did buy the unit used and never touched the tubing.. Except when I replaced the membrane.... Tell me I didn't...

[Big_Pun]

you have pretty fingers lol!!! yea you have some probs with the membrane. check if it seated properly . or just may need a new one. do you have a flush kit on the filter??

[350gt]

No flush kit... Going to pick one up and my own Tds meter from Louis this week hopefully...


And ya I use to be a finger model..... But just the middle one.

[Sherita]

Take a pic of the top of the unit, so we can see the tubing. That would be a good place to start.

You don't need a flush kit, just disconnect the line going from the last prefilter to the membrane. That will flush the prefilters without sending water to the membrane.

[350gt]