Looking for a mat of some sort...any suggestions?

[Mr Cob]

i have heard of people using 6mm pond liners inside their stands to trap potential spills. that might work for you

BINGO! I can even staple a lip inside my stand with it.

I'll use that with the mat Jason mentioned.

Thanks for the help everyone.

[txav8r]

That sounds like the perfect solution!

[justahobby]

I was going to suggest something w/ a lip on it... Sounds like Ace's idea is perfect. I'll have to remember this too

[txmike]

you can get pvc shower pan liner mat in the plumbing section cut out shape you want and glue the conners up with pvc glue.it is sold by the foot .


http://www.oatey.com/Channel/Shared/...Pan_Liner.html

[Mr Cob]

you can get pvc shower pan liner mat in the plumbing section cut out shape you want and glue the conners up with pvc glue.it is sold by the foot .


http://www.oatey.com/Channel/Shared/...Pan_Liner.html

Oh...that would have been nice. Just got back though will post whatI got in a bit.

[Mr Cob]

Was going to get this....but I would need 2 sheets at $21.68...little more than I wanted to spend:


Another really cool option...it's like a foam:


I got this: (thin rubber) to go in stand and under sump


With this to go under the stand:

[captexas]

If just for a cushion to protect the floor, could have used some of that pink/blue foam insulation they sell at Home Depot/Lowes for attics. They sell them in different size sheets. I've used a sheet of the pink stuff from HD as a cushion under a tank on a stand. You could then cut pieces to make a lip around the edges and run a bead of silicone around the corners.