UPCOMING: Events

Results 1 to 8 of 8

Thread: (Local only) Selling Phosphate/Carbon reactor, pinpoint pH monitor, skimmer, more!!

  1. #1
    Join Date
    11-16-2007
    Location
    Edinburg, TX
    Posts
    622

    Default (Local only) Selling Phosphate/Carbon reactor, pinpoint pH monitor, skimmer, more!!

    Im also selling a Pinpoint pH monitor with probe, but it needs to recalibrated, I think. it runs off a 9 volt battery which is best, or can be plugged in the wall but it interferes with the readings at times. These for go for more than 90 online, a new pH probe costs 38.99. Calibration fluids are very cheap and ive got 1 packet of the 7 pH fluid it so you can set the low reading reading, the fluids are only lke 0.50 cents. This is great for checking your readings when you dose kalkwasser or curious what your pH reading is at night vs. day

    selling this $45.00

    Small hang on tank top-fin filter i used to keep a 10g quarantine tank running

    $5.00, comes with live rock rubble that was in there-- id only use this for quarantine, nothing else

    7 Day of the Week Digital Timer, 1 outlet plug bought from Lowe's, cost 20.00 bucks

    Selling for $10.00

    Glass Heater by Rena-- 200 watts

    $5.00

    Mag-float 350 magnet, but the scrubbing part is worn down and i dont think you can get replacements. It's a very strong magnet, sure you can DIY something with this

    $4.00

    ATI BM-250 Body with pumps. The pumps would need new shaft and impeller assembly, but I would replace both powerheads. Each powerhead costs 149.99 from www.reefgeek.com I'm never going to set a large tank, so I'm not going to use this. All it needs are the two pumps and you'll be skimming like MAD. This skimmer costs over 600 dollars. This is a very BIG skimmer

    $230.00
    Last edited by rz1a; Tue, 14th Apr 2009 at 03:13 PM.

  2. #2

    Default

    Interested in the Bulk Reef Supply reactor.
    My Reef System: 215g Brick 72x24x29 Dual Overflows | 4x 250w MH | 4x IceCap 39w T5 w/ Actinics | MSX-250 Skimmer | 1/3hp Chiller | 16w UV | Aquacontroller 3 | Lunar Sim | AquaSurf |Tunze Wavebox | 2x Tunze Stream 6101 | MRC Dual Nano Calcium Reactor | GEO Kalk Reactor | Pan World 150PS Pump | Phosban & Carbon Reactors

  3. #3

    Default

    oops! Missed this was local
    My Reef System: 215g Brick 72x24x29 Dual Overflows | 4x 250w MH | 4x IceCap 39w T5 w/ Actinics | MSX-250 Skimmer | 1/3hp Chiller | 16w UV | Aquacontroller 3 | Lunar Sim | AquaSurf |Tunze Wavebox | 2x Tunze Stream 6101 | MRC Dual Nano Calcium Reactor | GEO Kalk Reactor | Pan World 150PS Pump | Phosban & Carbon Reactors

  4. #4
    Join Date
    09-21-2008
    Location
    Stafford County, VA
    Posts
    1,585

    Default

    Quote Originally Posted by rz1a View Post
    ATI BM-250 Body with pumps. The pumps would need new shaft and impeller assembly, but I would replace both powerheads. Each powerhead costs 149.99 from www.reefgeek.com I'm never going to set a large tank, so I'm not going to use this. All it needs are the two pumps and you'll be skimming like MAD. This skimmer costs over 600 dollars. This is a very BIG skimmer
    $230.00
    ok i am interested in this skimmer. can you post some pics?

    ~alex
    My name is AGGman, I am an Aquaholic...

  5. #5
    Join Date
    01-26-2005
    Location
    McAllen, RGV
    Posts
    1,847

    Default

    Hey ruben, i think i may be interested in the reactor. Possibly some other stuff. Send me a pm with phone number
    Jerry

    Trying to get back in the hobby... Will be seting up my 75g rr soon

  6. #6
    Join Date
    11-16-2007
    Location
    Edinburg, TX
    Posts
    622

    Default

    hey jerry, i didnt get any messages for this thread.. the reactor sold along with the Elos calcium kit and the 10g tank a week ago. what are you looking for?

  7. #7
    Join Date
    11-16-2007
    Location
    Edinburg, TX
    Posts
    622

    Default

    oh the hydor sold as well

  8. #8
    Join Date
    11-16-2007
    Location
    Edinburg, TX
    Posts
    622

    Default

    Quote Originally Posted by aggman View Post
    ok i am interested in this skimmer. can you post some pics?

    ~alex
    Aggman, If you want to chance I could ship but you'd have to add shipping to the cost since its huge. I could post a video link in a moment-- ill PM you in a bit.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •