Ammonia high in QT

[excal]

water parameters on QT

1.026
temp 75-76
ph 8.3
phosphate 0.25ppm
nitrate 0ppm
calcium 580
alkalinity 11dkh/214.8
copper 0.25ppm
ammonia 1.0ppm

20 long dosing cupramine and prazipro how can I lower ammonia level in tank without stressing fish..

[Mike]

Did it cycle? What is causing the ammonia? Any idea? Try prime and water changes. Quarantining the fish is not going to help if the ammonia kills them. Read the full descriptions on the meds you are using, to make sure they don't say anything about it causing false testing results.

[ramsey]

Also, you need to seed the QT with biological media or cycle it. What I do is run some biobale or ceramic media in my main tank ( for a month) then use that for the QT and replace the media in the main tank. This way, I always have a supply of seeded media for QT.

You can try using Prime to bring the ammonia down but I'm not a big fan of this method. I would recommend picking up some bio spira or fritz bacteria and add it to your tank. This will add bacteria that can colonize and jump start the cycle. Until you're able to do this, large water changes everyday.

[alton]

Water changes but from your display tank, and then buy a foam filter and place it in your sump so next time you will have a biological filter to use in your QT

[alton]

Something like this
http://www.marinedepot.com/Ista_Hydr...FRITAD-vi.html

Louis and Terry both carry these

[excal]

I have some filter media that was in my main tank running in filter and I have been using newly ro/di water.. Wasn't sure I had to do water change with tank water.. So I guess tank in trying to cycle off.. I'm home now so what amount is recommended to do a water change with display tank water.. Running 20 gallons in qt..

[alton]

What size tank is your display?

[excal]

65 with aTotal of 80 gal.. I did a 50 water change on my qt and still showing ammonia. Going to look in and see if it's the meds giving false readings.. My main has no ammonia showing up...

[excal]

Q: I'm using Cupramine™ and my ammonia test kit is showing ammonia off the scale. What is going on?


A: Ammonia test kits can not distinguish ammonia from the amine based complex present in Cupramine™ and will therefore give a false high reading for ammonia while using Cupramine™. Our Ammonia Alert™ and MultiTest: Free & Total Ammonia™ test kit do not suffer from this problem as they utilize a gas exchange technology that can distinguish ammonia from amines.

[alton]

To be safe I would do 5 gallon a day water change with your display and use the 5 gallons on your QT. FWIW I do FW bath and Prazi Pro, the only time I use Copper is when Ich is present