so here's a quick mock up of the canopy. The box on top of the canopy is a rough up of my reflector. It will be supported by two or four 1x2's on it's length and width. The entire front face will be removable with L-brackets on the top and bottom so it'll slide in and out. The back's panel is not as tall as the front one will be to accompany two fans and my external overflow/ return. The slim line's will go on both sides of the reflectors. I may have a shim on both side glued down to angle them inward, and a shim on the opposite side to keep them propped up.
Reply With Quote
