Im assuming you have 2 holes drilled on the bottom corner. What size are they and do you have bulkheads and any plumbing?
Web Member
Im assuming you have 2 holes drilled on the bottom corner. What size are they and do you have bulkheads and any plumbing?
happy reefing
Lets ride
Web Member
Yeah, two holes. 2" drain and a 1.5" return (I think. Will measure after the kids are in bed). I have all of the bulk heads and plumbing, though I can't get the drain bulkhead off. However, it still works.
No trees were harmed in the writing of this post. However, several electrons were GREATLY inconvenienced.
"If nobody makes you do it, it counts as fun." --Hobbes the Tiger
Web Member
I was off a bit on the plumbing sizes. The drain pip is 1.5" PVC and the return is 3/4" PVC. The holes are themselves are larger to accommodate the bulkheads.
No trees were harmed in the writing of this post. However, several electrons were GREATLY inconvenienced.
"If nobody makes you do it, it counts as fun." --Hobbes the Tiger
Web Member
I was off a bit on the plumbing sizes. The drain pip is 1.5" PVC and the return is 3/4" PVC. The holes themselves are larger to accommodate the bulkheads. Also, the drain pipe under the tank from the bulkhead to the end of the line has a large valve to close it off and three smaller valves the could be useful for running a reactor or protein skimmer via gravity. I haven't tried it myself as it was a fresh water tank, but it has potential.
No trees were harmed in the writing of this post. However, several electrons were GREATLY inconvenienced.
"If nobody makes you do it, it counts as fun." --Hobbes the Tiger
Posting Permissions
Reply With Quote