UPCOMING: Events

Results 1 to 9 of 9

Thread: Sea Lab #28 Block

  1. #1

    Default Sea Lab #28 Block

    The LFS had these at the checkout and the employees swear by it.
    It's a white block that slowly dissolves in your tank to replenish trace elements.

    Anyone ever used these?

    http://www.fosterandsmithaquatics.co...fm?pcatid=4166

    http://www.hdltd.com/products/p_blox.html

    DarkHorse
    DarkHorse
    __________________________________________________ ___
    It is not our abilities that show what we truly are, It is our choices. - Albus Dumbledore

  2. #2
    Join Date
    12-20-2007
    Location
    1604 and culebra
    Posts
    1,987

    Default

    Used them never saw a difference so stopped wasting money
    -Ruben-

  3. #3
    Join Date
    02-06-2010
    Location
    New Braunfels
    Posts
    2,278

    Default

    Yup, I don't see the point in a product like this if you're doing regular water changes with a quality salt.
    Master Reef Curmudgeon

  4. #4

    Default

    They are primarily calcium chloride along with trace elements. They work if you use them as Hiatt recommends by placing them in an area with zero flow, he recommends burying them in the substrate. Otherwise they dissolve too fast and will raise your calcium level too high.

    That said, I never liked using calcium chloride to maintain calcium levels so I only used them when I needed to make a one time adjustment.

  5. #5
    Join Date
    05-23-2009
    Location
    LaVernia, Texas
    Posts
    8,622

    Default

    I don't use the blocks but I do use calcium chloride powder to make my two part. Richard, would you mind elaborating on what your find worrisome or negative about calcium chloride?
    Karin



  6. #6
    Join Date
    10-16-2007
    Location
    San Antonio (Stone Oak)
    Posts
    154

    Default

    My buddy uses them they do work for the most part just have to keep in an area of low flow. If you do regular water changes i'm not sure they would be all that benefitial. I idea behind it is if you have enough of the calcium and trace they won't desolve as quickly but if your seriously lacking they will be gone within minutes. Then again he does a water change once every 3 years or so.
    JLiu

  7. #7
    Join Date
    09-10-2007
    Location
    norf side of san antonio
    Posts
    615

    Default

    used them once, in a hi flo area left me with Ca readings in excess of 700, discontinued use

  8. #8
    Join Date
    02-25-2008
    Location
    San Antonio
    Posts
    3,145

    Default

    Karin, I think most of the problems with Calcium Chloride date back to before we started using 2 part buffering systems. I used Kent Turbo Calcium in the 90's and it was a constant chase to keep the alk up since ca. chloride depleted it so rapidly. Kalkwasser was a better choice back then.

    The main negative side effect I saw from using turbo calcium was that impellers and other mech parts seemed to get clogged up with calcium crud really fast.

    And yeah, Hiatt kept recommending those blocks but I never used them.
    I refuse to join any club that would have me as a member.
    Groucho Marx

  9. #9

    Default

    Karin, yeah Cory pretty much described the problem with using calcium chloride. Eventually you get to a point where it's almost impossible to maintain alk/calcium/mag level because everything keeps precipitating out of the water. Two part systems are supposed to be ionically balanced so you don't get into that situation. Although I think if you went long enough without any/insufficient water changes you could see it happen even with the two part since they're never going to be perfectly balanced. So if you ever get to where you're having to add more and more and more of your two part just to maintain levels and your not getting lots of growth to account for the increase then it's time for some big water changes to set things right again.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •