-
Fri, 25th Jun 2010, 08:26 PM
#1
painted back
The back of my tank is painted black. Some places need touch so I got some black spray paint. Well u see what happened was, when I sprayed the areas that needed touch the old paint started to bubble n Peel. So now I have to scrap all old paint off and paint again. So my question is what paint do I use. The cheap paint was covering very lightly.
-Ruben-
-
Fri, 25th Jun 2010, 08:44 PM
#2
Kyron fusion. Don't buy anything else. Very easy to use, and sprays on thick.
-
Fri, 25th Jun 2010, 08:49 PM
#3
Krylon Fusion spray paint.
-
Fri, 25th Jun 2010, 09:02 PM
#4
Thanks will stop off at walmart tomorrow.
-Ruben-
-
Fri, 25th Jun 2010, 09:08 PM
#5
Krylon fusion!!!! very inexpensive paint and works great, make sure that before you spray the tank you use tape to cover what you dont want to get painted, and also very important, clean the back of the tank usually they have a solution at wal mart, it removes all the oil thats in the back of the tank, if theres oil when you paint it when it dries its going to bubble up and peel, the oil comes from your hands or whoever touches the tank our body oils smudge it, and when you clean it with a towel your not really removing it your just spreading it all over the tank, its a pre paint solution wich shouldnt be expensive at all but, well worth using.
-
Mon, 28th Jun 2010, 09:47 AM
#6
That's what Gabe and I used on the back of our tank.
Back In Business!

240gal BRICK!!

-
Mon, 28th Jun 2010, 09:54 AM
#7
thats all ive seen gabe use on tanks, you should do blue and put the san antonio skyline in black. lmao!!!!
REEF MAFIA

"TEFLON DON"
-
Mon, 28th Jun 2010, 09:56 AM
#8
Finished the paint. Moved tank inside. Just have to plumb the closed loop n then ready for water.
-Ruben-
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules