My 58 gallon mixed reef build

[Stephen73ta]

Ok, so I finally got my tank up and running! It's my first tank and it took me forever.. I'm really proud of it and hopefully I won't kill any livestock. I built a majority of the stuff myself and I'll try to show you how I did it.

Here is what I started with.


You will have to excuse me I accidentally deleted a lot of the construction pics of the stand. Here is what I have.


After I got the sides up I painted the stand with primer and then semi gloss black paint. Here I cut holes in the back for plumbing and the side for fans.
<br>


Here's the fans installed.

<br>
I also added this air vent.

<br>
Doors and Bracket.


<br>
Finished Product.. Well, atleast that's what I thought..


I ended up having to drill 4 more holes on the back two for the 3/4" inlet and return on the closed loop and two holes on the bottom left for electrical use..

I must say the planning of the sump/fuge and plumbing were some of the most complicated and frustrating tasks I've ever endured. I'm so glad it's over.<br>


Here is a drawing of my initial design.
>br>
I had a wet/dry system that I converted to a sump/fuge.

<br>

<br>

<br>
Bulkhead for return and i added some baffles, a bubble tower and drilled the fuge section that I closed up for another bulkhead. This will direct the overflow from the fuge straight into the return chamber bypassing the skimmer.






<br>

[Stephen73ta]

Here I modified the bulkhead because I had clearance issues with the baffles.


<br>

Showing the 1" overflow line from the fuge to return chamber.
<br>

Here's some pics of the equipment and plumbing.

Overlflow box single 1" return split with a T to fuge and bubble trap in skimmer section. There are valves on each line to control flow.




<br>
From left to right it goes return line, return #1 closed loop, intake for the loop, overflow and finally return #2 closed loop. Return line is 1" with a valve and the closed loop is 3/4" with a valve on each return.

[Stephen73ta]

Here's some pics of me creating a light bar to hang from the ceiling supporting my dual 150w metal halides. I constructed the frame out of 1" square aluminum tubing from home depot. I drilled it then painted it black. I hung the bar from the ceiling using eye screws and black chain.









<BR>

My live rock, just waiting to be in my tank! 60 lbs.
<br>

Timer for lights and fans.
<br>

We have Water!

[Stephen73ta]

Livestock:
60 lbs live rock
2 clowns
1 yellow striped dottyback
20 hermits
10 snails
3 peppermint shrimp
1 emerald crab
xenia

[blindside]

Nice build!

[ballardjr2000]

very nice i like the walk through lots of pics and worth the wait to get to the end

[Mr Cob]

Thanks for sharing. Looks great. Lots of work!!!