Mom and Pop Glass Place/Cutter

[ErikH]

Looking for a local place that is not afraid to cut a trapezoid out of glass. They would also need to carry glass, 1/8" is all. I need about 5 pieces, all under 1'x1'. Looking for a cheap place, should cost me around 8-10 dollars for all of it.

Please let me know if you have friends or family that own a place, would rather not visit a chain.

yes this is for a "special project" that you all should love.

[LoneStar]

Samuels Glass

[MattK]

I seriously doubt you will find anyone to do it for 10 bucks but you can do it yourself. All you need is a glass cutter, glass, and a straight edge. All can be bought at HD or Lowes.

[hobogato]

i may have some scrap plate glass in the garage that i can cut for you. i will let you know when i get home later tonight.

[ErikH]

Ok let me get on my other computer and look up the plans. Then I can give you the exact dimensions. Should be a pretty cool project.

[ErikH]

ok I need a plank 4"x12" made of 1/2" for the tank itself to sit on. I forgot that piece.

The glass is...
Front: 1 pane; 8 1/4” x 9 9/16”
Back: 1 pane; 8 1/4” x 9 3/8”
Bottom: 1 pane; 8 1/4” x 7 3/4”



And the tricky panes:


Should be easy enough. Let me know if you can do it!

[chumbucket]

if you can find all the glass to get the pieces you need out of, i am a glass man by trade and will be in S.A. this weekend. I could come by and cut them for you, no big deal. pm me if this helps any at all

[hobogato]

just remembered this, just brought the glass in to warm it up - a little harder to cut when it is cold. i will let you know when it is done.