UPCOMING: Events

Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: PROTEIN SKIMMER PROBLEMS

  1. #1
    Join Date
    02-20-2008
    Location
    LAREDO, TX.
    Posts
    259

    Default PROTEIN SKIMMER PROBLEMS

    ok when i bought my 210gal tank it was used and came pretty much with everything including the protein skimmer which is an REEF OCTOPUS 3000 and when i tried testing it to see if it worked well i realized that the pumps does lift the water all the way to the top but with very minimal bubbles, there is a small hose that is connected to the inlet of the pump and that is out of the water... so i figured well maybe the pump isn't any good so i ordered the same model of pump and same problem....what could be happening there are little bit of bubbles but not to were i could say okay my skimmer is working..... any suggestions as to what could be going on

  2. #2
    Join Date
    03-04-2005
    Location
    NE San Antonio
    Posts
    11,696

    Default

    the airline may be plugged with salt creep?
    Ace
    The Shade Tree Craftsman



  3. #3
    Join Date
    02-20-2008
    Location
    LAREDO, TX.
    Posts
    259

    Default

    Quote Originally Posted by hobogato View Post
    the airline may be plugged with salt creep?
    nope not that.... i just checked it and both the inlet and tubing are perfectly patent. can't be the pump i assume cause it's new.

  4. #4
    Join Date
    10-18-2002
    Location
    New Braunfels
    Posts
    4,358

    Default

    get it plugged in and blow into the end of the small airhose.. there is some back pressure in there that needs to be released and then it will work fine
    Last edited by Texreefer; Wed, 25th Feb 2009 at 04:15 PM. Reason: wrong info
    My Reef is Alive and well Despite My repeated Daily attemps to kill it!!

  5. #5
    Join Date
    02-20-2008
    Location
    LAREDO, TX.
    Posts
    259

    Default

    Quote Originally Posted by Texreefer View Post
    get it plugged in and blow into the end of the small airhose.. there is some back pressure in there that needs to be released and then it will work fine
    I tried this and it didn't work... blewsomein the small airhose and a big bubble came out from the intake of the water pump.

  6. #6
    Join Date
    02-20-2008
    Location
    LAREDO, TX.
    Posts
    259

    Default

    ok after doing some mini research this is the skimmer that i have very identical thisis the website..

    http://www.fishtanksdirect.com/index...OD&ProdID=2141

  7. #7

    Default

    did you have this running or are you testing it for the first time?
    90 gallon bowfront

  8. #8
    Join Date
    02-20-2008
    Location
    LAREDO, TX.
    Posts
    259

    Default

    Quote Originally Posted by texmexbigspring View Post
    did you have this running or are you testing it for the first time?
    the person that i bought it from said that he had it running but i didn't see it in actions although the skimmer was dirty like it had been in use. but i am just testing it for the first time and i bought a new pump for it too.

  9. #9

    Default

    sorry I missed that in the first post. It sounds like the same thing that happend with mine when I first tested mine. I was testing it with regular water and somebody told me that I had to use salt water to get the micro bubbles. Are you using salt water?
    90 gallon bowfront

  10. #10
    Join Date
    02-20-2008
    Location
    LAREDO, TX.
    Posts
    259

    Default

    Quote Originally Posted by texmexbigspring View Post
    I was testing it with regular water and somebody told me that I had to use salt water to get the micro bubbles. Are you using salt water?
    hmmm....nope i am just using regular water, but let me add some salt to it see what happens.... ha ha ha.. that isreally funny what salt can do..hope this works.. i'll be right back.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •