This week I will be upgrading my 14G Biocube with the Nanocustoms 3.24 upgrade from Nanotuners. I have already preped my extra hood and am very excited. I ordered the R2 Moonlight upgrade as well. Any comments or suggestions from anyone who has done this upgrade? Also if you need advice about the stock fans (CRAP) that come with the Biocube. If you go online and look for any fan that is 50X50X15 mm since this is the replacement size. Almost any you will find will be a 3-pin. The Biocube uses a 2-pin and you can find adapters from 2-pin to 3-pin very easy online as well. I did upgrade those noisy fans with no problem. By doing so, I saw a constant 3 degree temp drop. I personally bought the evercool 50X50X15 mm fans and increased to 14.7 CFM per fan over the measily 8 or so the stock fans do. I saved about $10 going the route I did versus using the Nanotuners constant on upgrade. You do get a little more fan noise than before but well worth the little extra noise. Please give me any ideas on the upgrade for the lighting or if you have questions about the fans and how to do it.

Thanks,
Kevin