-
Tue, 12th Aug 2008, 10:56 PM
#11
I'm having a bit of trouble with my IceCap 660 ballast and my GFCI. Every time I try to plug it in/turn it on when it's cold, it trips the GFCI. If I plug it into a non-GFCI outlet and let it run for a few minutes, then plug it into the GFCI, it works just fine. Anyone ever have something like this happen to them? I'm using a single plug GFCI that I picked up from Home Depot a few weeks back and a Coralife surge protector/dual timer. TIA.
-
Wed, 13th Aug 2008, 07:56 AM
#12
what else are you running on that gfci with the lights?
-
Wed, 13th Aug 2008, 11:03 AM
#13
I'm running 2 ~300 watt heaters (primary and backup), Koralia 3, CSS 65 skimmer, Mag 9.5 return pump and a small (~10 gallon rated) air pump. However, it still trips the GFCI with all of the pumps off. I'll have to test it with the heaters unplugged because I can't remember if they were on or not.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules