UPCOMING: Events

Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Expose rock/coral during water change?

  1. #1

    Default Expose rock/coral during water change?

    For the longest time I've had enough LR to only stack up about 60% of the way up my 150; that's 60% of the way up in the middle, 25-30% on the sides. Now I'm planning on getting more LR to make room for SPS by stacking higher. How high should I go?

    It occurred to me that when I do water changes, as it is, I drain the tank down to where a big plate coral that sits directly in the middle and sticks up gets slightly exposed. So I thought, how does someone with LR and large amounts of coral that sit high in their tank do a water change without exposing a bunch of the coral to air? What are your experiences? Curious and just thinking ahead, thanks...
    150 drilled. 3x250w 14k MH, 2 superactinic VHO. Reeflo Orca 250, 1/3hp drop-in, 16w UV, LR, SPS, Fish, Softies. Austin, Tx

  2. #2

    Default

    My corals are mostly frags but...

    during water changes, they get exposed to the air. I just try to be prepared with everything so the water change is done quickly.
    My Reef System: 215g Brick 72x24x29 Dual Overflows | 4x 250w MH | 4x IceCap 39w T5 w/ Actinics | MSX-250 Skimmer | 1/3hp Chiller | 16w UV | Aquacontroller 3 | Lunar Sim | AquaSurf |Tunze Wavebox | 2x Tunze Stream 6101 | MRC Dual Nano Calcium Reactor | GEO Kalk Reactor | Pan World 150PS Pump | Phosban & Carbon Reactors

  3. #3
    Join Date
    03-24-2007
    Location
    North Austin
    Posts
    584

    Default

    As long as the corals are not dry for an extended period of time they should be perfectly fine. In nature many corals are without water for a long-time during low tide.

  4. #4

    Default

    I have pulled my rock w/ corals attached out, to clean something off, to pull creeping gsp's, or just for rearrangement. I have left them out for up too about 45 minutes, no problem.
    30L w/10gallon sump 4xt5ho; Up and running:125g long, 30g sump, 50g fuge.

    "Life is tough, but it's tougher when you're stupid.”
    John Wayne

  5. #5

    Default

    Acropora and other shallow water coral are adapted to air exposure. And most people frag and glue their corals out of the water. I've been told that the only thing hurt by air exposure are sponges- they get "air-lock" in their siphons and water channels.

  6. #6
    Join Date
    07-21-2005
    Location
    281N of 1604, San Antonio, TX
    Posts
    5,844

    Default

    Mine get regularly exposed to air. I DO turn the lights off so as not to bake them.
    Bill

    215g FOWLR... and anemones, GSP, gorgonians... carp, that isn't FO!

    "I killed my first SW Fish in 1971..."

  7. #7
    Join Date
    02-25-2008
    Location
    Way out West. Culebra and 1560
    Posts
    5,347

    Default

    How much water does your sump hold? You could just drain it from there.
    200g-No Corals Yet!



  8. #8
    Join Date
    08-11-2006
    Location
    Canyon Lake (close to SA)
    Posts
    369

    Default

    Quote Originally Posted by ScorpiNO View Post
    How much water does your sump hold? You could just drain it from there.
    Thats how I do it, I use 2 pumps. I pump out from the section that the overflow goes into. Then I use another pump to pump from another bucket back into the section where the return pump is. My water never fluctuates.
    55g with (2) 250w MH electronic ballast w/ Reeflux 12k
    SPS reef . 2-Koralia #3's , 30g-ish Sump.
    RedSea Berlin Turbo Skimmer, Teco Chiller

  9. #9

    Default

    Good feedback thanks.. My sump is only 20gal, and stays about 3/4 full - not nearly enough to absorb a 30-40% water change without pulling from the display. I do pullfrom the sump during a change.. Either way, sounds like there are no major concerns. I get my WC done within about 20 minutes.. Anyone else?
    150 drilled. 3x250w 14k MH, 2 superactinic VHO. Reeflo Orca 250, 1/3hp drop-in, 16w UV, LR, SPS, Fish, Softies. Austin, Tx

  10. #10

    Default

    Also, I'm looking for a bigger sump, but have limitations related to cabinet doors.. What's the ideal sump volume for a 150? The answer is probably - the bigger the better, right?
    150 drilled. 3x250w 14k MH, 2 superactinic VHO. Reeflo Orca 250, 1/3hp drop-in, 16w UV, LR, SPS, Fish, Softies. Austin, Tx

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •