UPCOMING: Events

Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: dying fish

  1. #1

    Default dying fish

    Warning, if u wear reading glasses place them over your eyes now....sorry its long...really long


    I'll start off by telling u whats new because it may help. As of yesterday at 7am my fish were put into a plumbed 40 breeder with 20g sump. Out of the old 46g almost all water went between the 40&20, all sand was used. Water was very cold this morning around 73-74 degrees when I woke up ( I have two heater running in sump plus heat of return pump) and I noticed my six line wrasse was laying on his side breathing hard. I looked around and my very very very nice powder blue was dead on his side. Idk what happened?I'm a little upset because the pb and six line had tons of character. I was thinking the coldness, the plumbing? Idk they were fine for a 24 hours till this morning. My 2 clowns and clown goby are fine along with mandarin and scooter.
    Thanks you,
    Stephen
    Stephen.

  2. #2

    Default

    ammo 0
    nitrite 0
    nitrate .5
    other perameters are the readings for sa tap water as far as alk, ph, and hardness.
    Stephen.

  3. #3

    Default

    all my inverts are fine too, well can't see harliquin's they hide
    Stephen.

  4. #4
    Join Date
    06-15-2005
    Location
    Killeen/ Fort Hood
    Posts
    448

    Default

    How deep was your sandbed in the old tank? Also, how long was that sand in your old tank?

  5. #5

    Default

    the sand bed was about an inch deep in most spots and around 5 months old
    Stephen.

  6. #6

    Default

    most likely an acclimation problem.

  7. #7

    Default

    they would be fine for a whole day then die? They were eating and swimming just fine when I went to sleep.
    Stephen.

  8. #8

    Default

    the temp wasn't THAT cold, but they probably were not used to such a fluctuation?
    3rd year into reefkeeping.
    -Van

  9. #9
    Join Date
    10-16-2007
    Location
    San Antonio (Stone Oak)
    Posts
    154

    Default

    What did you use to clean the tank out with before you moved systems?
    JLiu

  10. #10

    Default

    Quote Originally Posted by JLiu View Post
    What did you use to clean the tank out with before you moved systems?
    the drilled tank? Just rinsed it thoroughly with warm water
    Stephen.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •