Mag 18 - Advise Needed

[DBlackman]

kaiser, Yes, I was made aware on the use of 'elbows', to include other factors on flow restriction. But the insight on the use of T/s and PVC/s or plumbing in general, were not to use materials that are smaller then the outlet of the pump being used. I figured that using 1-inch tubing and 1-inch 'T's' wouldn't be a major factor... unlike the 3/4 inch fittings on the SWID. When I take the Mag 18 out for cleaning, I will check it's condition. If there are stress fractures, then I will need to put the SWID on a separate pump or something. Just don't want to add additional electrical equipment.