Weldon #40

[matt]

Anybody in SA have any weld-on #40 (2 part) that is less than one year past the date on the box? Or, would anyone like to split a pint that I'll order if noone in the club has any? I'm certain the local acrylic stores don't have it, and on the rare occasion I've seen some at one of the stores, it's always been well past the expiration date. For anyone that might not know, weld-on #40 is by far the best stuff to fix broken acrylic pieces and to cement PVC to acrylic. It's been long enough since I've built anything that my stash is past the expiration.

Thanks

Matt

[hobogato]

i have a little but it is dated august 06 i will go in on a pint with ya if you know of a good way to split it up.

[matt]

Okay, I'll get a pint. Ace, if you want you can empty your containers of the old resin and activator, and we can split it up that way. I may need to order some new o-rings and nylon screws/nuts so if you want some of those we can go in on those too. I have to check to see if I have any o-rings left. I only need one for this reactor and I think they come in a bag of six. The o-rings are 5.75" diameter, perfect for sealing 6" tube flanges. The mcmaster-carr screws/nuts are the best ones I've found, but they come in bags of 50.

[hobogato]

i have plenty of nylon screws, and dont use the o rings. my containers for the weldon are tiny as they were part of a sample, so i dont know if that will work.

[matt]

I'll figure something out for a container. I just placed the order, I'll let you know when it gets here.

[hobogato]

thanks matt.