UPCOMING: Events

Results 1 to 5 of 5

Thread: Aquatic Warehouse - 4/3/07 Shipment & Maxi-Jet Mod Updat

  1. #1
    Join Date
    06-06-2003
    Location
    301 W. Nakoma - San Antonio TX 78216 210-308-7333
    Posts
    505

    Default Aquatic Warehouse - 4/3/07 Shipment & Maxi-Jet Mod Updat

    Hello again, we just got in some new fish, here's whats in stock today:

    Blue Hippo Tang
    Yellow Tang
    Gold Naso Tang
    Powder Blue Tang
    African Cleaner Wrasse
    Copperband Butterfly
    Percula Clown
    Green Mandarin
    Spotted Mandarin
    Powder Brown Tang
    Sohal Tang
    Clown Trigger
    Yellow Coris Wrasse
    African Radiant Wrasse
    Flasher Wrasse-Male
    Gold Striped Maroon

    Long Tenacle Anemone
    Rose Anemone
    Banded Coral Shrimp
    Cleaner Shrimp
    Fire Shrimp
    Harlequin Shrimp
    Featherduster
    Long Spine Urchin
    Turbo Snail
    Astria Snail
    Blue Leg Hermit
    Peppermint Shrimp

    Maxi-Stream Mod Update:
    I know that alot of people are waiting for mods. We've been so busy the past few weeks that our production is crawling. We plan on having a few more built by the end of the week. If you're on our waiting list please be patient, we'll be building these as quickly as possible!

    Hope to see you soon,
    Louis
    http://elegant-reef.com/wp/wp-conten...er_logo-01.png
    Elegant Reef - Tropical Fish Studio
    301 W. Nakoma - San Antonio, TX 78216 - 210.308.REEF (7333)
    Website - Facebook - Twitter - YouTube - Map


    - REEF MAFIA -

  2. #2

    Default RE: Aquatic Warehouse - 4/3/07 Shipment & Maxi-Jet Mod U

    Hey Louis, question for you, how do you keep the prop rotating in the right direction? I have a couple mods and I cant seem to get one of them to spin properly on a long term basis. Any tricks you wanna share? Sorry to jack your thread dude.

  3. #3
    Join Date
    06-06-2003
    Location
    301 W. Nakoma - San Antonio TX 78216 210-308-7333
    Posts
    505

    Default RE: Aquatic Warehouse - 4/3/07 Shipment & Maxi-Jet Mod U

    if it is a start and stop issue then it could be a number of things ranging from bad rubber gasket, misaligned shaft, shaft thats too long, bad propeller, poorly seated 'coupling', too much restriction in the shroud, or even worn out maxi-jet to name a few. I have alot of tricks but it would be easier to talk over the phone, give me a shout at the store and we can try to figure out whats wrong with your mod.

    Louis
    http://elegant-reef.com/wp/wp-conten...er_logo-01.png
    Elegant Reef - Tropical Fish Studio
    301 W. Nakoma - San Antonio, TX 78216 - 210.308.REEF (7333)
    Website - Facebook - Twitter - YouTube - Map


    - REEF MAFIA -

  4. #4
    Join Date
    06-06-2003
    Location
    301 W. Nakoma - San Antonio TX 78216 210-308-7333
    Posts
    505

    Default RE: Aquatic Warehouse - 4/3/07 Shipment & Maxi-Jet Mod U

    Also, if the prop does not spin correctly during startup check that the stopper has been installed. Its a small piece of plastic attached near the opening of the shroud. The idea is that the prop will spin the wrong way and shoot itself forward, hit the stopper, then pop back down and hopefully spin the right way, provided all I mentioned above are not the cause of the problem.

    Good luck!
    Louis
    http://elegant-reef.com/wp/wp-conten...er_logo-01.png
    Elegant Reef - Tropical Fish Studio
    301 W. Nakoma - San Antonio, TX 78216 - 210.308.REEF (7333)
    Website - Facebook - Twitter - YouTube - Map


    - REEF MAFIA -

  5. #5

    Default RE: Aquatic Warehouse - 4/3/07 Shipment & Maxi-Jet Mod U

    Excellent! Ill holler at you sometime tomorrow.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •