Mag 12 pump

[apedroza]

I have a mag 12 pump that I was thinking of using as a return pump. I am running a mag 5 currently on my 70gal and I also have 2 seio 1100 1 850 and 1 tunze nanostream. Would this pump be overkill? I was going to add another return port so I'll have 2 returns, but with this much flow do I need it?

[LoneStar]

If you are thinking of a lesser gph pump, you might try contacting JimD.

http://www.maast.org/index.php?name=...ic&t=23065

[apedroza]

Thanks I'll check it out

[Shark_Bait]

Upgrading your return pump can turn into a headache. I went from a mag7 to a mag9. overflow box couldn't keep up. wound upi becoming a total rushed re-plumb job. Though it does move more water and the SPS appreciate it, wish I would have been ready for that much of an upgrade.

Not saying a bad idea just be ready.

[5.0Stang]

i went from a rio+ 2100 to a mag 9.5 and had to buy another overflow box but i got that box from david which had 2 bulkheads and i could take the old one off which had a single bulkhead. It sounds like you got your tank drilled? If so i would do the 12 so you can make a spray bar of some sort and take the powerheads off

[BIGBIRD123]

I second what Lonestar says about contacting JimD because he has an Eheim 1262 he'd like to trade for a Mag12. The eheim would be a better return pump. I doesn't have as much thrust as a Mag12 but still has around 900 gph flow that could be dialed down.

steve

[brewercm]

Also take into consideration that rather or not your overflows will handle it, do you want that much flow going through your sump? Sounds like you have a lot of flow in there already also, sounds like you have your corals etc. already in a whirlpool bath.
If you're point is to remove the powerheads you can put in a closed loop system and just use a J tube down into the tank about half way to use as the inlet if you can't drill it since it's already up.