[quote="SBreef"]
Quote Originally Posted by AlexKilpatrick

Alex, I am not geting on you, but to anyone who reads this post, "Never" over fuse a unit, meaning replacing a blown fuse with a higher amperage fuse. Never replace a Fast Blow fuse with a Slow Blow fuse.
This is good advice. I would also like to add that there is usually a reason a fuse blows; they rarely blow just out of the blue. If you don't find out why the fuse blew, it will probably just blow again when you replace it. This is why you don't want to over fuse, because that problem will still be there and you will draw too much current, kill your device, burn down your house, etc.

I remember in the old days when people used to replace the round, screw-in filters that they had in houses with a penny. :o