UPCOMING: Events

Results 1 to 5 of 5

Thread: little help

  1. #1
    Join Date
    08-23-2005
    Location
    san antonio
    Posts
    361

    Default little help

    ok guy/gals iam setting up my 20 gallon. it is being drilled with a 3inch hole. i will be using a sump/fuge. my question is what size water pump will i need to use to return my water to the tank???

  2. #2
    Join Date
    05-14-2003
    Location
    San Antonio, 281/1604 area
    Posts
    3,484

    Default RE: little help

    This would be better off in the equipment / Do it yourself area for getting an answer.

  3. #3
    Reef69 Guest

    Default RE: little help

    No idea...IMO..Even the Mag Drive mini is too big (65 gph) for your 20 gal. tank.

  4. #4

    Default

    I run a mag 3 on my 20L. The limiting factor is the rate of flow that your overflow can handle. Remember it must be screened off in some way to keep livestock out. I have the pump, from the sump, restricted to slow the flow. Place a valve somewhere in the return line.

    I have seen some flames on this site aimed at those of us putting sumps and fuges on small tanks. I say go for it. My 20 is my favorate setup.

  5. #5
    Join Date
    10-13-2003
    Location
    NW San Antonio
    Posts
    7,113

    Default

    Remember that a small pump like a Mag 2 is going to have a pretty good amount of head pressure loss, so that you may only get 100-150 gph from it. If you split that between two flows you're down to 50-75 gph per side. I have a feeling something like that would be fine for that size tank. That's less flow than you would get from a Maxijet.
    Gary

    125 SPS, 75 gal. LPS/softie reef, 9 gal. Nano

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •