It would use acrylic its easier to work with and stronger and lighter than glass and you dont have to worry about getting cut. All you would have to do is make sure the pieces fit and glue and let it dry for about 3 days and water test. You can get the materials from most hardware store's like lowe's, home depot for what you are looking to do, but if you want a place to pre-cut your pieces or if you are looking for thicker pieces more than hardware carries then regal plastics. I used them to build my whole sump and they did all the cuts and everything for about 150.00 and its a 60 gallon sump with 3 sections and all I had to do is glue.

Jason