Just seeing if there are any folks here that are REALLY good at this. We are doing new lighting on the boat, and have had some great early success with building an LED strip. When I tell you these beasts are bright, I'm not kidding...

Anyway, the LEDs we want to try (they are a "warmer" white than the cool whites) are NOT available mounted. While I'm pretty good at soldering, these things are small (3mm x 4mm) and must be mounted flush on the PCB for heat transfer. Here are the LEDs:

http://www.luxeonstar.com/item.php?i...LXML-PWN1-0070

And here are the boards:

http://tinyurl.com/24ptal