NEW!! Ultra High Performance RO Membranes!

[BuckeyeHydro]

So how do you calculate your RO membrane's rejection rate?

You'll need two numbers to get started:
TDS of your feedwater (tap water)
TDS of your RO water (not DI water)

Plug those numbers into this formula:
1 - (RO TDS/Tap TDS)

For an example, let's say your tap water TDS is 287 ppm, and your RO water TDS is 17 ppm.
1- (17/287)=
1- (0.06)=
0.94, or 94%

This means that 94% of the TDS in the tap water DOES NOT make it through to your RO water - it is sent to the drain with your waste water.

A higher the rejection rate the better.

Russ

[350gt]

So with my RO at 6 and tap at 260

my rejection rate is 98%?

[BuckeyeHydro]

So with my RO at 6 and tap at 260

my rejection rate is 98%?

Yes sir. You're in good shape!

[350gt]

Nice!......

I will try the new membrane out eitherway next time around.

[Big_Pun]

thanks Russ can't wait to use them!

[Big_Pun]

wow certified very impressed!

[BuckeyeHydro]

And in answer to some questions:
1. YES! - these membranes fit in standard residential RO membrane housings
2. The flow restrictor to use with these membranes is BFS-217 Capillary flow restrictor, pre-trimmed for 75 gpd

Russ

[BuckeyeHydro]

Just finished yesterday the treatment/testing on another big batch of MAQR Membranes. Plenty in stock now.

Russ

[Big_Pun]

very happy with performance. thanks Russ