UPCOMING: Events

Results 1 to 5 of 5

Thread: Any ez way to remove old silicone from a 75 sump and baffle ends?

  1. #1
    Join Date
    05-19-2010
    Location
    Bandera and Eckhert
    Posts
    4,645

    Default Any ez way to remove old silicone from a 75 sump and baffle ends?

    Any ez way to remove old silicone from a 75 sump and baffle ends?

    Im gonna rearrange some baffles. Any idears lmk

    Thanks
    Last edited by BBQHILLBILLY; Sun, 29th Apr 2012 at 08:45 PM.
    happy reefing
    Lets ride

  2. #2
    Join Date
    08-11-2011
    Location
    San Antonio Texas
    Posts
    230

    Default

    I'm no expert but probably a razer.

  3. #3
    Join Date
    05-19-2010
    Location
    Bandera and Eckhert
    Posts
    4,645

    Default

    Removing silicone can be tedious if you hold a razor with your hand and scrape down and then try to scrape off and clean.

    There has to be an easier way. Especially if you want a smooth surface.

    Also if you remove the baffle it has the old silicone on the edges. Using a razor blade to make a smooth surface wont work.

    lmk
    Last edited by BBQHILLBILLY; Sun, 29th Apr 2012 at 08:47 PM.
    happy reefing
    Lets ride

  4. #4

    Default

    A fresh razor is about the only way I would attempt it. There are chemicals, such as MEK (methyl ethyl ketone) that will take it off, but I wouldn't want it anywhere near an aquarium.
    John Roescher

  5. #5
    Join Date
    04-27-2012
    Location
    Sa/tx Ingram & timberhill
    Posts
    129

    Default

    Food grade acetone or alcohol and an extremely good clean with vinegar all I can think of

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •