Bunch of stuff!!!!

[javajaws]

All of this equipment is in great condition and most was being used on my tank I just broke down:

LiterMeter III - $140
Iwaki MD30RLXT - $140
10lb Aluminum CO2 cyclinder - $60
Heavy duty Harris dual stage CO2 regulator w/solenoid - $100 (this is the BEST regulator you'll find - it's a true dual stage regulator, not just a dual guage like most hobby regulators)
Tunze Nanostream 6025 - $40
Reef Fanatic Level Controller - $40
2 x ViaAqua Titanium Heaters - $20 (for both)
2 x Maxi Jet 1200 - $10 each
Dwyer Flow Meter (for CO2 from CA reactor) - $10
Pinpoint ph monitor - $40
Refractometer - $30
Eheim automated feeder - $20
2 x Azoo click on dual fans units - $10 for a used one, $20 for a new/unused one

Set of test kits, most of these are pretty new and have lots of tests left:
(LaMotte Alk, D-D phosphate, Salifert KH, MG, NO3, CA) - $50 for all

Mixed lot of chemicals (1 liter TLF hydrocarbon unopened, 100ml Rowaphos unopened, 500ml Rowakalk unopened, 500 ml black diamond carbon, Seachem magnesium, pro-coral cure unopened) - $25 for all

110g Inwall tank, euro-braced, 2-side low-iron (front and back), 12 holes predrilled on ends. Includes overflow and all bulkheads (8 1" sched 80, 4 1.5" sched 80), and even around 8 true union 1" ball valves - the good ones). Search for "12-hole inwall" on reef central for pics). $200

I also have an acrylic sump I'm going to sell for $100, but I don't have pics just yet...


I may not be avalable this evening for pickup but I'll be around all day tomorrow.

Pickup from my house only, no delivery or meeting somewhere, etc. I live by the Dell Diamond.


246-7570

- Jason

[javajaws]

Also forgot:

Mag 5 pump (used for water changes only) - $30
Mag-Float 350 - $10
Mag-Float 350 w/OceansMotions Mag scraper - $20

[ACE]

Is anyone going to Austin from SA next week? If so, I'll take the two Maxijets.

[clamgal]

I'm with ACE. If anyone is going, I'll take 2x Azoo dual fans (used).

[clamgal]

or just 2. It doesn't matter if its used or not

[rz1a]

what are the dimensions of the sump?

[javajaws]

ACE, the maxi-jets are already sold - sorry about that.

clamgal - no problem, i'll hold it/them for you.

rz1a - I'll measure it tomorrow morning for you first thing.

[javajaws]

The sump is 16.25W x 35.75L x 16H. It's made out of 1/2" acrylic, has 2 bulkhead holes in one end (to feed the return pump and another pump), and 2 smaller bulkhead holes in the intake side (1 high for an overflow to drain, another lower down for an aux pump). I'll include all 4 bulkheads as well (sched 80).

[bozack]

interested in the remaining calcium reactor accessories.
Heading out the door so I'll send a PM later

[javajaws]

bump, still lots of stuff available.

Items sold:

2xmaxijets
mag scraper
chemicals

If you are interested in more than 1 thing we can make a deal...