UPCOMING: Events

Results 1 to 9 of 9

Thread: Local RO Parts

  1. #1
    Join Date
    05-14-2003
    Location
    San Antonio, 281/1604 area
    Posts
    3,484

    Default Local RO Parts

    Does anybody know where I can get plumbing parts locally.

    What I'm looking for is the under sink adapter for my inlet. The cr@ppy needle valve that came with mine doesn't seem to work very well. I just want to cap that off and put in the other style that works much better IMO.

  2. #2
    Join Date
    02-21-2004
    Location
    North Austin/Round Rock
    Posts
    333

    Default RE: Local RO Parts

    Believe it or not I have found a decent selection of this type of stuff at Home Depot and Lowes. RO related plumbing stuff seems like it would be really specialty but the same size line (1/4") is used for many other applications (icemakers, etc) so the big stores have sections with a good amount of stuff.
    -Mike

  3. #3
    Join Date
    10-21-2002
    Location
    Central TX
    Posts
    2,535

    Default RE: Local RO Parts

    For what you are looking for, I'd try HD or Lowes. The same kind of needle valves are sometimes used for ice maker lines so they carry that kind of stuff.
    -Chris

  4. #4
    SBreef Guest

    Default RE: Local RO Parts

    What do you have for inlet water?
    I had to do some plumbing work on sink area. I used PVC and Tee'd off from the main, used a ball valve, then adapted down. The ball valve is for when I need to replace cartridges.

  5. #5
    Join Date
    05-14-2003
    Location
    San Antonio, 281/1604 area
    Posts
    3,484

    Default RE: Local RO Parts

    Josh,
    That's the way my other ro unit is setup. This one is under the sink tor drinking.
    I've looked at HD and lowes and will have to go again tomorrow. Not wanting a needle valve, those suck.

  6. #6
    Join Date
    05-14-2003
    Location
    San Antonio, 281/1604 area
    Posts
    3,484

    Default RE: Local RO Parts

    Well, it took me a little while to get it rigged up right but I was able to work something out after about $22 in parts.

    Real pain in the *****, but I finally got it hooked up right.

  7. #7
    Join Date
    05-14-2003
    Location
    San Antonio, 281/1604 area
    Posts
    3,484

    Default

    BTW, just for info purposes.

    If you get an RO unit and it has one of those nice saddle valves, the self piercing types and that valve ever starts to leak.
    YOU'RE SCREWED.

    Just wanted to get my 2 cents in against those worthless pieces of CR@P again just in case anyone is getting reado to buy a unit. Go the extra couple of $$ and get the regular style T off valve. :angry

  8. #8
    Join Date
    03-29-2005
    Location
    Virginia Beach, Virginia
    Posts
    734

    Default

    If you can't find the parts you need I bet you Alex can get them for you. I got my RO unit and all the stuff I needed for it from him ^_^
    Plenums and ultra deep sand beds > all other setups!

  9. #9
    Join Date
    05-14-2003
    Location
    San Antonio, 281/1604 area
    Posts
    3,484

    Default

    I finally got it up and going again this morning with the good parts after a second Lowes adventure when they opened up. Unfortunately my water had to be off all night though due to the leak.

    No, I'm not a plumber. I just stayed at a Holiday Inn Express. <_<

Similar Threads

  1. where to buy parts for overflow?
    By bprewit in forum Equipment & Do It Yourself
    Replies: 5
    Last Post: Wed, 30th Mar 2005, 01:33 AM
  2. PVC parts
    By jaded in forum Equipment & Do It Yourself
    Replies: 6
    Last Post: Fri, 18th Mar 2005, 05:44 PM
  3. Panworld Parts.
    By MikeyBoy in forum Equipment & Do It Yourself
    Replies: 19
    Last Post: Wed, 9th Feb 2005, 10:55 AM
  4. Electrical parts that might help ...
    By ::pete:: in forum General Reefkeeping Discussion
    Replies: 15
    Last Post: Thu, 10th Jun 2004, 09:04 AM
  5. Changes to By-laws (2 parts)
    By Polkster13 in forum Questions, Comments & Suggestions
    Replies: 2
    Last Post: Fri, 2nd Jan 1970, 03:22 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •