UPCOMING: Events

Page 3 of 3 FirstFirst 123
Results 21 to 30 of 30

Thread: Reactors

  1. #21

    Default

    The bucket of water only needs to be higher than the kalc reactor, not the tank.
    135 gallon reef and 29 gallon mini-reef.

  2. #22

    Default

    You do have a sump under your tank, correct?
    135 gallon reef and 29 gallon mini-reef.

  3. #23
    jaded Guest

    Default

    room is the issue... I'm running incredibly low on realestate under there. I think I'm going to have to build a "book shelf" to the right of the tank. I could fit a 7"x7" reactor, but the grav feed is another issue

    I'll have to see what happens after the sump/skimmer install this weekend

  4. #24
    Join Date
    10-17-2002
    Location
    Cedar Park TX
    Posts
    3,152

    Default

    Donnie posting would be fine.
    You can place a filter after the unit if you want, but if it is constantly doseing all day the tiny amount of water dribbling out in intervals won't be enough to blast up the kalk on the bottom. It is more a gentle swirl. As soon as I can, I'll do a JPEG on the unit for you to see it in action.
    Tim Marvin
    (512) 336-7258

  5. #25
    donniekim Guest

    Default

    Thanks Tim I linked it to MARSH and I and others are along for the ride!

  6. #26
    Join Date
    03-31-2005
    Location
    Cedar Park
    Posts
    226

    Default

    Mike(Aquadoc) Owner/ Cheif aquatic engineer of Advanced Reef Technologies(A.R.T)

    We should start production, by the end of this week. I WILL have a model ready in time for the meeting.
    Hopefully I will have several models though.
    Mike Hummel
    \"A happy acro, is a fed acro.\"

  7. #27
    jaded Guest

    Default

    what happened with these??? I'm very interested!!! Does anyone have one running? How is it?

    I'll be adding a RODI system in the next week or so and I'm going to want to go with a kalk and Ca reactor soon after.

  8. #28
    Join Date
    10-17-2002
    Location
    Cedar Park TX
    Posts
    3,152

    Default

    I am running the prototype as we speak. It works awesome thus far. Powder gets stirred everytime the tanks dose, but the kalk settles back down before it reaches a couple inches off the bottom. It is a gentle stir rather than blasting it with a pump.
    Tim Marvin
    (512) 336-7258

  9. #29
    jaded Guest

    Default

    I sent off a PM to aquadoc about both a calcium and kalk reactor... I can wait on both since I'm not quite ready for SPS yet, but I am interested in this units performance!!! Thanks for the update, I'll watch your other thread for more!!!

  10. #30
    Snausages01 Guest

    Default

    I have somewhat been in the market for a kalk reactor, but its not really at the top of my list; however, with a deal that appears to be as good as this I think it has definately moved up on my list. Whenever they become available I'd definately get one if I have the funds.

    Put me down for a 2 footer. :P

Similar Threads

  1. Phosban reactors.
    By caferacermike in forum Equipment & Do It Yourself
    Replies: 3
    Last Post: Sat, 13th Jan 2007, 04:17 PM
  2. Knop reactors
    By dark8nge1 in forum Equipment & Do It Yourself
    Replies: 2
    Last Post: Fri, 6th Oct 2006, 06:29 AM
  3. Who makes the best CA reactors?
    By aquadoc in forum General Reefkeeping Discussion
    Replies: 12
    Last Post: Fri, 3rd Mar 2006, 11:17 PM
  4. CA Reactors
    By ::pete:: in forum Equipment & Do It Yourself
    Replies: 29
    Last Post: Sun, 21st Aug 2005, 08:49 PM
  5. Reactors
    By Tim Marvin in forum General Reefkeeping Discussion
    Replies: 0
    Last Post: Thu, 1st Jan 1970, 10:28 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •