CA Reactor

[bumpintj24]

how's it coming along alex?

[TroyPham]

y can't u just add a line to the intake side of the pump from the sump to draw water in instead of having another pump to fill the reactor?(syphine water in as water flows out) u don't flow that much water from the reactor to the tank. so i the other pump would not be needed. can u do another drawing with the CO2 flow, it's input point and the water input point from the sump

[bumpintj24]

hey alex...

Here is where I'm at with mine. My question is do I have to drill holes in the lower tube that holds the media plate? Or Do I just install through the inner tube so that the water rises through the spray bar? Let me know what you think. Thanks. Ram

http://www.nano-reef.com/gallery/dat...197Cr-3_2_.JPG

[alexwolf]

I am going to drill holes, just in case. Then, use a filter pad or some filter floss to stop the media from falling down.

[bumpintj24]

wont that affect the flow for the spray bar because the water will be pushed out the sides? If not what size holes should I drill in the inner tube. I'll just drill two so that not that much flow is lost.

[bumpintj24]

any updated pics alex.

[alexwolf]

not yet, we worked on it last night

[alexwolf]

all done

[bumpintj24]

nice. Good you snap a shot of the bottom of the spray bar? Thanks. LOOKS AWESOME!!!