View Full Version : Ducan rotting away!!
jason081180
Sun, 13th Apr 2014, 11:36 AM
Hey guys, I got this Ducan coral from a member about 8 months ago and it has been doing great and growing a lot in my tank. Then I got a Yellow Watchman Goby and he decided one night to bury the end of it in sand. By the time I really saw what was going on the end 3 heads were rotting away. I took the coral out as softly as I could to keep the rotted flesh with it so it wouldnt get everywhere. washed it and cleaned off as mush as i could. that was 2 days ago. Today I got up and see that another head of it is rotting. pictures are from this morning.
What should I do? do i need to frag off the healthy part to save something? I have never fragged Ducans before.
24234
24235
350gt
Sun, 13th Apr 2014, 11:41 AM
Cut it with a dremel and place the bad half somewhere with less flow.. It can bounce back.
Paul28
Sun, 13th Apr 2014, 11:55 AM
Its called brown jelly its nasty an can spread to the good parts fast :(
jason081180
Sun, 13th Apr 2014, 03:02 PM
No one else has any other suggestions? Done anyone have a dremel I can use for a day?
Paul28
Sun, 13th Apr 2014, 03:19 PM
I don't but I use a hacksaw that works not best but works
350gt
Sun, 13th Apr 2014, 03:38 PM
I recently broke mine or i would let u borrow it.
Dean
Sun, 13th Apr 2014, 03:42 PM
I have one but live in floresville. Your welcome to come get it
- Dean
rrasco
Sun, 13th Apr 2014, 04:42 PM
I battled this with my Duncan after my (former) clown made a home in it. I lost about 1/3 of it in the process, but I kept the mush off with a turkey baster, dipped it in lugols and revive (not at the same time and on separate occasions). Took a while, but it bounced back minus the part of the stock I lost.
In the reading I have done on it, many people recommend fragging off the bad parts, but there is no guarantee in that either.
LuckySingh
Sun, 13th Apr 2014, 04:48 PM
This is branching corals.
SnAp it in worst case and break it apart. U should be fine or use clippers
jason081180
Sun, 13th Apr 2014, 04:53 PM
the branches seem a bit thick to just break but maybe they are weak. i found a cut off wheel at Lowes that should work in my drill so I think ill go that route.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.