PDA

View Full Version : LOTS of Misc equipment for sale



stephencraig
Fri, 31st Dec 2010, 08:44 PM
Euro-reef RS 180 (w/ recirc mod) skimmer – For you that have seen my tank or the video of it, this skimmer was the backbone of my filtration system. It began its life as a regular RS 180 for about two years. After getting the Elos, and not liking the Elos skimmer, I did the recirc mod (modifying it to take an Ehiem 1262 needle wheel recirc pump from Euro-reef with their kit) and used it for about another two years on my 200 gal Elos. Original RS180 was $500, a recirc (RC series) is now $1000. I’ll sell it for $250 (includes Ehiem 1262). For an extra $100, I also have another Ehiem 1262 specifically made for this mod that I got so I could take one pump off to clean and immediately replace it with the spare so I never went without a skimmer.

Trigger Systems skimmer – would need some work to get going, but I still have most of the parts. Was using it for second chamber for Ca reactor, but with a few parts, could be fully functioning skimmer (was over $400 originally). $50

Two 400W CoralVue ballasts – $100 each

Two Luminarc full size Modul reflectors (with glass screens) – one used for about a month, the other still new. $120 for new one, $100 for slightly used one.

Two Icecap 430-008 T5 or VHO ballasts (NIB) – $90 OBO

Four 5 foot VHO bulbs (NIB) Super Actinic - $10 each

Coralife Turbo-Twist UV Sterilizer – used forr 2 – 3 months, so bulb should have a good deal of life yet. $75 OBO

Tunze 6100 Stream, includes magent holder - $100

Eheim 1262 pump - $100 OBO

Refractometer - $20

Four TwoLittleFishes reactors - $10 each

Hanna hand held TDS meter - $15

Deltec Kalkwasser reactor (never used) - $100

Ancient Mariner gravel washer – has all the bells and whistles, extension tube, extra filtration chamber, etc.. I used it a few times, came from Dale who used it once, who got it from Greenmako who used it only a few times. Obviously still like new. Over $400 new. Sell for $150 OBO.

4 foot dual T5 fixture - $20

Mixing station (pic below) – includes stand, two 55 blue barrels, one 40 gal RO/DI barrel, two Danner mag drive pumps, Artica 1/10 HP chiller, Husky mixing barrel, piping, etc. $400 Will consider parting out.

Tons of PVC fittings, valves, etc., both white and Sch 80, will sell for very cheap. If you are planning a plumbing project, you need to come here first and save lots of $$.

Aquaripure Coil Denitrator (never used). Was orinially $250, will sell it for $50 just to get rid of it.

Magnvore algae cleaner – these are $100 - $150. Still in great shape. $40

Tsunami Wave make, 4 plug - $25

Lots of other stuff – Deltec Ca media, test kits, small Maxi-Jet pumps, etc. Much of the small stuff will be given away to people who purchase stuff from above. However if you want to come look and make an offer on some of it, that’s fine too. There are hundreds of dollars of stuff here, just don’t want to mess with sorting it out and listing it seperately.


Stephen

StevenSeas
Fri, 31st Dec 2010, 09:04 PM
Would you be willing to ship to sa? Or meet halfway in San macros?

The Butcher
Fri, 31st Dec 2010, 10:05 PM
I am interested in: Tsunami Wave maker, 4 plug - $25

Gseclipse02
Fri, 31st Dec 2010, 10:11 PM
anyone going to pick up anything and wouldnt mind bringing something back ?

aquadude
Sat, 1st Jan 2011, 12:09 AM
PM sent.

stephencraig
Sat, 1st Jan 2011, 02:12 AM
Aggiereefer12 - it would depend on what it was (no on a $10 something, definitely yes on something like the skimmer). However, there are normally people going back and forth so I don't think it would be much of a problem. Let me know what it was you were interested in.

The Butcher - you are 1st up for the Tsunami. Please verify and I'll put it on reserve for you.

Stephen

allan
Sat, 1st Jan 2011, 10:28 AM
YGPM

allan
Sat, 1st Jan 2011, 06:26 PM
Any of you folks interested in going in for shipping cost? There are two items that I would like, I take it that JT would like something and Butcher, you're here in SA. It would save Stephen some time as packaging it to one address is a lot easier than sending out multiple orders to the same town.

Or if someone is heading out there, or coming here from corpus christi?

StevenSeas
Sat, 1st Jan 2011, 06:30 PM
i would go in with you allan, that is if we could decide what wallmart to meet up at before we meet up ;)

Stephen I am interested in how much work would be needed to fix up the trigger systems skimmer. Also the 4 reactors and the refractometer. And possible the TDS meter and the kalk reactor or uv sterilizer(how many watts).

TexasTodd
Sat, 1st Jan 2011, 06:44 PM
Hey Allan, there's your water mixing "CLEANING" set up. ;)

Gseclipse02
Sat, 1st Jan 2011, 06:58 PM
Hey Allan, there's your water mixing "CLEANING" set up. ;)

hahaha

allan
Sat, 1st Jan 2011, 07:31 PM
Ha ha Todd. 4 bills is a bit more than I wanted to blow on the project.

Aggie,
I suggest that I come to you... DONT ATTEMPT TO NAVIGATE!!! ;)

stephencraig
Sat, 1st Jan 2011, 08:39 PM
Allan,
Take it from someone who built one (this one), you will end up spending more than $400. By the time we finished just the stand (lumber, screws, paint) I had dropped between $100 - $150. Add to that the two barrels, pvc plumbing with a lot of valves, an RO/DI barrel (40 gal), and the Husky mixing barrel (really a 42 gal trashcan), the chiller, and two pumps, and I have much more that double that in it. I'll try to get a pic of it posted here in the next day or so.

Stephen

los.tejanos83
Sat, 1st Jan 2011, 09:17 PM
PM sent

stephencraig
Sat, 1st Jan 2011, 10:26 PM
I can't figure how to attach pics here, but I just posted a pic of the mixing station and Euro-Reef on the ARC site.

Stephen

stephencraig
Sun, 2nd Jan 2011, 01:24 AM
Someone had asked either from this thread or the ARC one about the gravel washer:

It's the Ancient Mariner APGV 100 with extension tube and double filter tower.

Stephen

ZeroHour
Sun, 2nd Jan 2011, 02:16 AM
Id be interested in all 4 2 little fishes reactors, and can paypal if someone is heading that way or can meet you with cash. Let me know if they are still available.

aquaman72
Sun, 2nd Jan 2011, 02:02 PM
I am interested in the 4ft light if you still have it. I didn't notice what city you are in.

los.tejanos83
Sun, 2nd Jan 2011, 02:25 PM
PM sent...awaiting info...will buy kalk reactor if other buyer backs out.

allan
Sun, 2nd Jan 2011, 04:36 PM
Hey folks,

My buddy's Cunadó lives in Austin, it may be possible for him to pick up the gear and bring it down at his convenience.

Getting a hold of him now.

allan
Sun, 2nd Jan 2011, 04:56 PM
Okay, just got off the horn with him and he said he'd be happy to swing by after work tomorrow and pick up equipment for us.

My buddy said that she can go up, in fact she said she's way overdue, to visit her aunt and pick up the gear that you all want.

It won't be as quick as fedex but I imagine that should the opportunity present itself to visit her aunt that she would go sometime this week and if not the wife and I will drive up next weekend.

Your call.

Stephen, sending pm now.