PDA

View Full Version : SKIMMER PVC CRACK


TEXASFIST210
Sun, 5th Sep 2010, 05:26 PM
well i had notice some bubble's coming out more on one side,
and found a crack on the pvc.
is it possible to buy some pvc and replace it or do i have to order
on?

second problem. less bubble making.
when i fist bought it, it made alot of bubbles
now its makes less bubbles, how can i fix this problem ?943994409441
txg8gxp
Sun, 5th Sep 2010, 10:16 PM
PVC primer and glue will seal it, just not sure if it's the level water adjustment or not.
CoryDude
Sun, 5th Sep 2010, 10:26 PM
PVC primer and glue will seal it, just not sure if it's the level water adjustment or not.

Agree. You can use super glue gel or underwater epoxy, as long as it's not a pressurized line.
CoryDude
Sun, 5th Sep 2010, 11:47 PM
Fewer bubbles?

What brand and type of skimmer is this? Is it a venturi and needle wheel skimmer like an octopus or euro reef skimmer? Usually, taking apart the pump and cleaning it once a month helps. Also make sure the venturi air inlet is open and clear of deposits. I usually poke a paper clip in mine to remove calcium deposits that build inside.