Pm kalk reactor setup

[kkiel02]

Ok just had a couple questions on the kalk reactor.
1. How much kalk do you put in? I think I was told 6" but don't quite remember.
2. Is the outlet side just pushed out as the top off is added?
3. What tubing is supposed to come off the john guest fitting outlet side. Or what do you use to come off the kalk reactor to go into the sump.

Got the reactor with the tank so didn't have directions or paper work.

[wesheltonj]

Water in on one port and kalk water out on the other, set pump to run 4 times in 24 hours for 15 minutes each time. I believe the 6" is about right. IF you go to the PM web site , they will have a PDF of the instruction that you can print off.

[kkiel02]

Sweet gonna check it out. Thanks

[JimD]

Did you get your reactor up and running? If you have questions, just ask, Ive been known to build a kalk reactor or two in the past so I pretty much know what not to do... ..

[kkiel02]

Yeah it's up and running. Ran two check valves just to be safe. Thanks again