RICKY81
Thu, 8th Jan 2009, 05:15 PM
a few days ago my corals started to look droopy.. just not too good. i have a kenya tree which was slumped over, open brain which was shrunken and with a weird color, a closed brains was shrunken and showing some skeleton..... i have a mixture of sps, softies,palys and zoas.. so i checked my levels and nitrate was at about a 40, did a water 10%water change and dropped to about 10ppm...but one major thing that i did was that my tank was used to having an ALK at around 1.4-1.6, so a friend of mine told me need to pick it up quick. so he showed me a website on Reefcentral and used the formula to dose it Seachem Reef builder to raise the Alkalinity..... the thing that i did is that i added all 9tsp that was recommended to raise the alkalinity in 2 seperate doses within a 6-8 hr period...
now the alkalinity did raise up to about a 3.6,
ph 8.4,
nitrates 10,
nitrite 0,
ammonia 0,
salinity 1.23,
calcium 420
phosphates 0.1
temp 72
**my tank parameters have usually been wacky about what i have right now the only drastic change was the alkalinity but i have still noticed that the corals are not looking good but they aren't getting worse. What could be causing this to the corals?
** another thing that i noticed is that since this past incidence my temp.has been fluctuating alot. i forgot to hook up the heater back on and temp was about 62.. corals were shrunken, then next day raised to 78, now is back at 72, should i keep my metal halides on or off... what do you guys recommend any suggestions greatly appreciated... thanks
now the alkalinity did raise up to about a 3.6,
ph 8.4,
nitrates 10,
nitrite 0,
ammonia 0,
salinity 1.23,
calcium 420
phosphates 0.1
temp 72
**my tank parameters have usually been wacky about what i have right now the only drastic change was the alkalinity but i have still noticed that the corals are not looking good but they aren't getting worse. What could be causing this to the corals?
** another thing that i noticed is that since this past incidence my temp.has been fluctuating alot. i forgot to hook up the heater back on and temp was about 62.. corals were shrunken, then next day raised to 78, now is back at 72, should i keep my metal halides on or off... what do you guys recommend any suggestions greatly appreciated... thanks