PDA

View Full Version : 90g Oceanic/Skimmers/pumps/Stuff



akm
Wed, 5th Mar 2008, 02:57 AM
This is most of everything I've been trying to sell for awhile, so here you go.

*Here are some pictures of the tank, skimmer, and panworld.
http://s111.photobucket.com/albums/n131/matlocka0491/Equipment/

90 gallon Oceanic bowfront, tank stand and canopy. 48" long, 27" high, and 18" wide in the middle. The stain is cherry oak. Everything looks fine except on the inside bottom of the stand the water damaged the stain. $400 obo

Beckett Skimmer (by Pete), single beckett but has a place for another. 26" tall, foot print is around 8"x11". $125

Panworld 150ps, 2 years old, works great w/ basically no rust. Used on the skimmer above and worked great. $75

Pacific Coast Imports regulator and selenoid, works perfectly, never used. $75

JBJ regulator and selenoid. One gauge is bent so it doesn't work and the bubble counter is missing. $25

LED setup, 2 red lights and 2 blue that can be controlled seperately with a little controller. $10

LED setup, 3 blue light and 1 spot for one but it's missing. This is one I made but works and is cool. $5 or free with something else other than the other LED.

Pin Point pH monitor, 2 years old, probe has been out of water so I think it needs to be replaced. $30

Acura 300w heater $10

30 gallon long $10

I can have pictures of everything once I find my camera.

Thanks a bunch

watson0720
Wed, 5th Mar 2008, 09:10 AM
ygpm

apedroza
Wed, 5th Mar 2008, 09:15 AM
Is there a way to test the pH monitor to see if the probe needs to be replaced??? I'd also like to see a pic of it. Also interested in the phosban reactor.

joelb
Wed, 5th Mar 2008, 09:16 AM
i'll take the 30g long for $10

akm
Wed, 5th Mar 2008, 09:53 AM
Hey apedroza, I think the only way to test it would be to buy some calibration solution and take readings of it and see if the monitor reads the same pH as the calibration solution is supposed to be.

apedroza
Wed, 5th Mar 2008, 10:14 AM
If your going to the swap I'll go ahead and take it. I'll take the reactor also if its still available

joelb
Thu, 6th Mar 2008, 05:19 PM
are you going to be later today, can you send pm with you #?

apedroza
Thu, 6th Mar 2008, 09:14 PM
Still interested in the probe!!! Will you be at the meeting??

tropicana
Thu, 6th Mar 2008, 10:45 PM
If the PH probe falls through, let me know, interested!

akm
Fri, 7th Mar 2008, 07:23 PM
Bump

joelb
Fri, 7th Mar 2008, 07:29 PM
ygpm

SKNR
Fri, 7th Mar 2008, 08:20 PM
Interested in the heaters the 2 50w and the rio pumps.
Are you going to the frag swap tomorrow?

mattymalcolm
Fri, 7th Mar 2008, 09:16 PM
have the seaclone and the three rios been spoken for? are you going to the meeting?

apedroza
Fri, 7th Mar 2008, 11:20 PM
Still wondering about the pH meter!!!

akm
Sun, 23rd Mar 2008, 08:36 PM
Bump, added some pictures.

KyleV
Sun, 23rd Mar 2008, 08:47 PM
Where did you add them? Might try again.

apedroza
Sun, 23rd Mar 2008, 10:14 PM
pH meter is working like a charm. After a cleaning and soaking for several hrs in pH 4.0 buffer, it is now reading on point!!!

akm
Sun, 23rd Mar 2008, 10:43 PM
That's great apedroza, glad you're happy. Now if I can sell the other one.

Kyle the pictures are really a link to my photobucket in the first post.

dwhit0725
Tue, 25th Mar 2008, 06:04 PM
Email sent...

akm
Thu, 27th Mar 2008, 04:01 PM
Bump, there is actually a link to some pictures this time.

Rock
Thu, 24th Apr 2008, 09:35 PM
I would like to buy the tank and stand you have posted, and possibly the skimmer. I tried to send a message earlier, but I'm not sure it went through. Please give me a call and let me know when I could come buy and see it and hopefully buy it. Thanks

Dave 210-710-6398
Cibolo, Tx

ianmoede
Thu, 24th Apr 2008, 09:36 PM
He fell through on a deal with me and stopped responding to PMs.

BigKGlen
Thu, 24th Apr 2008, 11:40 PM
"That's great apedroza, glad you're happy. Now if I can sell the other one."


What 'other one' do you have? Is it the Tunze Ph monitor?

Kevin