combination kalk reactor and calcium reactor - SOLD

[hobogato]

i finally finished putting these together, but they didnt turn out as perfect as i would like, so i am selling them for $250 each instead of the $350 i was gonna ask. each one has two reactors - one tube is a kalk reactor (you will still need a stirring pump and a feed pump) and the other tube is a calcium reactor (you will still need a circulation pump, feed pump and the CO2 setup)

http://i30.photobucket.com/albums/c329/hobogato/Image001-5.jpg

[hobogato]

btw, those are 6" diameter tubes and they are a little shy of 2' tall.

[BIGBIRD123]

DAYUM, ACE! Those are nice. That's less than half of what they would cost if made by someone that knew what they were doing....J/K.

:P :D

Guys, you want get 'em cheaper than this. Great job!

steve

[AMulwani]

just sent PM

[hobogato]

back atcha :)

[hobogato]

had some PMs about this so i thought i would explain a little

there are two separate reactors for sale

each ONE of these reactors has TWO tubes that are separate reactors.

one of the tubes is a kalk reactor similar to this (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=PM-KALKREC&Category_Code=creactor) except it does not come with a stirring pump.

http://i30.photobucket.com/albums/c329/hobogato/pmkalk.jpg

the other tube is a calcium reactor similar to this (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=PA-GEO624&Category_Code=creactor) ecept it does not come with the stirring pump.

http://i30.photobucket.com/albums/c329/hobogato/geocalc.jpg

if i were gonna set up one of these reactors, the follow are the stirring pumps, dosing pump, supply pump and CO2 setup that i would use (they are only recommendations - you could use different ones if you wanted) - hence these are the additional things you would need to buy to set these reactors up on your tank

kalk reactor

stirring pump (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=PW-10PX&Category_Code=Panworld) - $65

dosing pump (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=AM-70100&Category_Code=Dosers) - $83

calcium reactor

stirring pump (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=PW-30PX&Category_Code=Panworld) - $92

CO2 regulator (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=GEN-XCO2REG&Category_Code=co2units) - $90

CO2 tank (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=RF-CO2-T5&Category_Code=co2units) - $75

pH controller (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MIL-SM122&Category_Code=Milwaukee) - $100

feed pump (http://www.premiumaquatics.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=MJ1200&Categ ory_Code=Maxijet) - $20

you might be able to find some of this stuff (or alternates) locally or used, i just posted these links for simplicity's sake.

[BIGBIRD123]

If you ever thought about setting-up reactors, these are as cheep as your're gonna get. I don't mean in quality.
If you want to keep an SPS tank, then reactors like these are a must for the high calcium demands. They will help regulate your Alk and Ca. I would be all over one of these but we built MONSTERS for my tank. They too were made by Ace.

Steve

[erikharrison]

sweet, I still want it. I think I trust Ace a little :P

[erikharrison]

Oh yeah, ty for the extra info!

[hobogato]

ok, how about $200?

[txstateunivreefer]

i need to get paid :(

[aimaike]

If anyone is going to S.A., I would gladly give them gas money to pick up one of these. It is just going to be really hard for me to get down there and I want one of these. Anyone?

[sawarf]

I too live in N. Austin and would buy one if I could get help setting it up or detailed instructions. How many gallons will it support?

[ckimble]

You said they are 2' tall, what are the other dimensions? LxW?

Thanks

[hobogato]

reaction tubes are 6" diameter, footprint is slightly larger than 11" X 15"


I too live in N. Austin and would buy one if I could get help setting it up or detailed instructions. How many gallons will it support?

probably good for up to 300 gallon system (best guess on my part). i would be glad to walk you thru the setup ;)

[Jynxgirl]

Ace.... Ever since getting the sump and you showing me these, I have been non stop thinking why I dont really need this. and how much money this is going to cost me... LOL BUT there really is no reason why I don't need it. :D

I will take one if its still available. I can paypal or come get it sometime next week. Oh, and when I come, I am going to bring my PM skimmer and have you explain it to me, because for the life of me, I don't get it.

Jill

[Jynxgirl]

oooppppsss....

[hobogato]

should be home next week, just lmk what day.

btw, once these two are gone, the price will be $350 each for any i make in the future. as stated before these have some flaws so i wont charge full price for em.... that is why these two are $200 each.

[Jynxgirl]

Prob Tues, but I will call you.

Also, I go thru Austin. If someone wants me to pick the other one up, let me know. Gas money would be appreciated.

[aimaike]

Jynxgirl-Sold! That is exactly what I was hoping for yesterday. Will PM you here shortly

[hobogato]

you can send paypal to ashedd@satx.rr.com ... please include the 3% fee (total would be $206)

[bozack]

Hey Ace,

Didn't you have one of those media reactors left?

Jynxgirl, if you could pick that up for me I can met ya in Austin on your way back.
Let me know and I can Paypal Ace if so

[Jynxgirl]

No problem. I do not mind picking it up. I will probably be coming back thru around threeish. I drive down I35.

Jill