PDA

View Full Version : penductors and eductors



Texreefer
Thu, 15th Sep 2005, 01:35 PM
has anyone used either of these on your aquariums and if so what were the results. they are supposed to increase water flowby up to five timeswww.toofishy.com/home.php?cat=720

::pete::
Thu, 15th Sep 2005, 01:49 PM
I have 4 of them on my system ... I cant say enough good about them ... they are awsome!!

z28pwr
Thu, 15th Sep 2005, 04:44 PM
I have 2 Eductors on my system and they ROCK.

pickle311
Thu, 15th Sep 2005, 04:47 PM
I use 2 eductors also and the flow is crazy, just make sure you are using them with a good pressure rated pump or you'll be wasting your money

::pete::
Thu, 15th Sep 2005, 04:52 PM
I use mine (all 4) off a sequence dart that is my closed loop and feed an OceansMotions super squirt!!

JeffCo
Thu, 15th Sep 2005, 04:55 PM
Pete,
you don't have any problems with the OM sticking? I have been wanting to do this with mine, I have just heard from many people that the drum will stop rotating due to the pressure.

::pete::
Thu, 15th Sep 2005, 05:13 PM
I did in the very beginning, but after a phone call to Paul who stayed on the phone and walked me through every step it works fine. I took the drum out dremmeled the hole a little larger to releive some of the pressure, sanded the top of the drum down so the magnets made better contact and sanded the sides so the fit is a little loose. I get very little flow out of the next or last port as it switches, but trust me it doesnt hurt the flow any at all. :D

Texreefer
Fri, 16th Sep 2005, 09:30 AM
COOL GUYS THATS EXACTLY WHAT I WANTED TO HEAR!

brewercm
Fri, 16th Sep 2005, 10:51 AM
Do any of you think these would work ok with a Little Giant 3-MDQX-SC which puts out 1100 GPH. I have it split to two outlets running on seaswirls?

::pete::
Fri, 16th Sep 2005, 02:16 PM
You could try one on the end of the seaswirl