View Full Version : sump pump suggestions
captexas
Tue, 22nd Oct 2002, 10:37 PM
Hello everyone. I am going to add a sump to my 58gallon and wanted to see what your experiences have been with the different pumps. I'm thinking of using a 20gallon high tank for the sump so that really won't leave much room for an external pump, but I may try to fit one in as there are more choices with them than submersibles. Please let me know how your pumps have performed/any problems/noise levels/etc. Thanks!
Chris :roll:
Tim Marvin
Wed, 23rd Oct 2002, 12:36 AM
Make the sump a refugium and use a mag-7 or 5. They make a little hum but can be used internal or external. They are 3 prong and ground protected.
Tim Marvin
Wed, 23rd Oct 2002, 03:19 PM
They'll wait until you get the tank just the way you like it then they'll melt down and wipe you out..... :o :o :o :o :o :o :-o :-o :-o :-o :evil: :evil: :evil:
Tim Marvin
Wed, 23rd Oct 2002, 05:24 PM
What Iwaki are you looking for?
Tim Marvin
Fri, 25th Oct 2002, 07:53 PM
I don't have one, but they usually run a couple hundred for one that size. MAK-4/Gen-x is a comparable pump so are the bluelines. These pumps are around $150 range. Also Mag-drives push a lot of water. A mag 9 is in that range and cost around $80.
Joe Bruha
Sun, 27th Oct 2002, 10:14 AM
I love my Iwaki. It's quiet and dependable. A great investment, but they are kinda big.
Tim Marvin
Sun, 27th Oct 2002, 11:00 AM
Iwaki is a great pump, just a little more pricey.
VGB
Sun, 27th Oct 2002, 11:29 AM
If you drill that glass (I assume your 20 high sump will be glass) I would use an Iawaki...if you use a submersible...I would go with a mag....I have used Iawakis for years now and am very sataisfied
Tim Marvin
Sun, 27th Oct 2002, 11:31 AM
If you are drilling the sump I would definately use an external pump like Iwaki VS internal/external like a mag.! It will free up room in the sump.
captexas
Sun, 27th Oct 2002, 03:51 PM
Thanks for the input everyone. I'm actaully going to try to cram a 29gallon tank in my stand for the sump. May have to find/build a taller stand since this one is kind of short. Since there won't be any extra room, I am gonna use a Mag 12 for the return. I ordered a double overflow box from Lifereef so I should be able to create some good circulation for my 58gallon tank. I pland to split the return with one pipe going to each end of the tank. I will then Y off with locline so I can divert the return water in 4 directions.
TexasState
Mon, 28th Oct 2002, 02:20 PM
Chris,
Do you have a fine oolithic sand bed? The Mag 12 dual/oveflow is going to stir the heck out of your sand bed in a 58. A mag 950(on a restricted ball valve) kick the heck out of my 72 bowfront.
If you're ordering from Lifereef. Specify to make your overflow a slimline model, and make the syphon(front box) to be black or blue.
I have the slimline model, and it take up less room then the full version.
captexas
Thu, 7th Nov 2002, 08:45 PM
Just wanted to let everyone know that today I finally got my sump installed and running! I had been planning it for awhile and still had problems with it for a few hours. Unfortunately my stand is not as tall as I would like it and that caused problems. But as they say, I came, I saw, and I conquered! My tank looks so much better with all the powerheads, heater, skimmer, and stuff out of sight! I love it. :-D
Now to pay off the credit card! :shock:
Chris
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.