des
Fri, 1st May 2015, 09:40 PM
Hey everyone,
I am moving across the country so I have lots of various equipment to sell. If you don't like a stated price make me an offer. If there is high interest for any items it will be first come first served!
First, I have a hardly used Icecap VHO 660 T5 ballast. It has a 3 prong plug and harness wired to end caps for 4 bulbs already. Also comes with heat sink. All you would need is a fixture/reflector and bulbs. Great for a custom set up. It was used for about 2 months over my 40 breeder SOLD
http://i1036.photobucket.com/albums/a443/solo7534/9993a44d.jpg
http://i1036.photobucket.com/albums/a443/solo7534/39c8d390.jpg
I have four 39W T5 bulbs that have never been over a tank (they were meant to go with the icecap ballast). They have zero hours of "use" but were briefly tested when received. Colors are GE 6500, Fiji Purple, Super actinic, and Blue Plus. $5 each
http://i1036.photobucket.com/albums/a443/solo7534/9a8b1d7e.jpg
(new bulbs still in boxes, used bulbs exposed)
I have four used 39W T5 bulbs that were bought used and then put over my tank for about 2 months (with the icecap) before I shut it down. I can't really say how much life they have left but were still very bright before I shut the tank down. I believe I have 2 blue plus and 2 aquablue from ATI. Take them all off my hands as spares for $2
I have an octopus skimmer NW-110 that was used in my tank for about a year. It was purchased from aquarium designs in san antonio. Unfortunately, I broke the PVC tubing from the needle wheel pump to the skimmer while dismantling the tank. It might be repairable, as the pump still works great, but if not then a replacement pump would come with the replacement tubing needed. The actual reactor and cup are in great condition. $20
Here is a picture of the broken piece. It is broken off where the PVC connects to the pump. Might be repairable with epoxy or you might need a new needle wheel pump:
http://i1036.photobucket.com/albums/a443/solo7534/1d47a335.jpg
http://i1036.photobucket.com/albums/a443/solo7534/1a91866c.jpg
I have the 40 breeder tank and stand for sale. Unfortunately I cracked the tank while trying to clean it but someone might be able to use it for something. $10
Bulkhead and return from glas*sholes.com $20
Very sturdy custom 40 breeder stand. SOLD
As it sits now:
http://i1036.photobucket.com/albums/a443/solo7534/43cbbe4e.jpg
Return:
http://i1036.photobucket.com/albums/a443/solo7534/653596fb.jpg
Bulkhead:
http://i1036.photobucket.com/albums/a443/solo7534/ea6fd920.jpg
Rear:
http://i1036.photobucket.com/albums/a443/solo7534/7df05ee0.jpg
I have a bunch of other random stuff that I no longer need. Here goes:
Wavemaker alternating powerstrip SOLD
http://i1036.photobucket.com/albums/a443/solo7534/9cb9bbd6.jpg
Empty RO/DI canister that I used for DI resin. SOLD!!!!
http://i1036.photobucket.com/albums/a443/solo7534/8f35b5c1.jpg
Giessman 250watt DE 15K "Chrome" bulb. Bought it used, has about 8 months total use on it @ 7 hrs/day. $5
http://i1036.photobucket.com/albums/a443/solo7534/5b38a689.jpg
BRS Reactor (http://www.bulkreefsupply.com/brs-gfo-carbon-reactor-single.html (http://www.bulkreefsupply.com/store/brs-gfo-and-carbon-reactor.html)). Filled with Carbon, but never used. Pump not included. SOLD!!!
http://i1036.photobucket.com/albums/a443/solo7534/076ce171.jpg
A Koralia 2. The 2 is in good shape. SOLD
http://i1036.photobucket.com/albums/a443/solo7534/13991fea.jpg
I have a bunch of other odds and ends, tubing and supplies that I haven't organized and taken pictures of. Hoping I can unload some of that for cheap or as party favors for those who stop by for other things. Please PM me or post if you have any questions, want pictures, or would like for me to clarify anything. Will update this post. Thanks!
I am moving across the country so I have lots of various equipment to sell. If you don't like a stated price make me an offer. If there is high interest for any items it will be first come first served!
First, I have a hardly used Icecap VHO 660 T5 ballast. It has a 3 prong plug and harness wired to end caps for 4 bulbs already. Also comes with heat sink. All you would need is a fixture/reflector and bulbs. Great for a custom set up. It was used for about 2 months over my 40 breeder SOLD
http://i1036.photobucket.com/albums/a443/solo7534/9993a44d.jpg
http://i1036.photobucket.com/albums/a443/solo7534/39c8d390.jpg
I have four 39W T5 bulbs that have never been over a tank (they were meant to go with the icecap ballast). They have zero hours of "use" but were briefly tested when received. Colors are GE 6500, Fiji Purple, Super actinic, and Blue Plus. $5 each
http://i1036.photobucket.com/albums/a443/solo7534/9a8b1d7e.jpg
(new bulbs still in boxes, used bulbs exposed)
I have four used 39W T5 bulbs that were bought used and then put over my tank for about 2 months (with the icecap) before I shut it down. I can't really say how much life they have left but were still very bright before I shut the tank down. I believe I have 2 blue plus and 2 aquablue from ATI. Take them all off my hands as spares for $2
I have an octopus skimmer NW-110 that was used in my tank for about a year. It was purchased from aquarium designs in san antonio. Unfortunately, I broke the PVC tubing from the needle wheel pump to the skimmer while dismantling the tank. It might be repairable, as the pump still works great, but if not then a replacement pump would come with the replacement tubing needed. The actual reactor and cup are in great condition. $20
Here is a picture of the broken piece. It is broken off where the PVC connects to the pump. Might be repairable with epoxy or you might need a new needle wheel pump:
http://i1036.photobucket.com/albums/a443/solo7534/1d47a335.jpg
http://i1036.photobucket.com/albums/a443/solo7534/1a91866c.jpg
I have the 40 breeder tank and stand for sale. Unfortunately I cracked the tank while trying to clean it but someone might be able to use it for something. $10
Bulkhead and return from glas*sholes.com $20
Very sturdy custom 40 breeder stand. SOLD
As it sits now:
http://i1036.photobucket.com/albums/a443/solo7534/43cbbe4e.jpg
Return:
http://i1036.photobucket.com/albums/a443/solo7534/653596fb.jpg
Bulkhead:
http://i1036.photobucket.com/albums/a443/solo7534/ea6fd920.jpg
Rear:
http://i1036.photobucket.com/albums/a443/solo7534/7df05ee0.jpg
I have a bunch of other random stuff that I no longer need. Here goes:
Wavemaker alternating powerstrip SOLD
http://i1036.photobucket.com/albums/a443/solo7534/9cb9bbd6.jpg
Empty RO/DI canister that I used for DI resin. SOLD!!!!
http://i1036.photobucket.com/albums/a443/solo7534/8f35b5c1.jpg
Giessman 250watt DE 15K "Chrome" bulb. Bought it used, has about 8 months total use on it @ 7 hrs/day. $5
http://i1036.photobucket.com/albums/a443/solo7534/5b38a689.jpg
BRS Reactor (http://www.bulkreefsupply.com/brs-gfo-carbon-reactor-single.html (http://www.bulkreefsupply.com/store/brs-gfo-and-carbon-reactor.html)). Filled with Carbon, but never used. Pump not included. SOLD!!!
http://i1036.photobucket.com/albums/a443/solo7534/076ce171.jpg
A Koralia 2. The 2 is in good shape. SOLD
http://i1036.photobucket.com/albums/a443/solo7534/13991fea.jpg
I have a bunch of other odds and ends, tubing and supplies that I haven't organized and taken pictures of. Hoping I can unload some of that for cheap or as party favors for those who stop by for other things. Please PM me or post if you have any questions, want pictures, or would like for me to clarify anything. Will update this post. Thanks!