Hydra Lighting Help [Archive]

aceer15

Wed, 7th May 2014, 04:20 PM

I've posted on here a few threads about my upcoming frag tank. It will be 22x27x11" with a frag rack on the left 2/3's. This rack will raise about 1/2-2/3 the way up the tank to allow higher PAR rating on the rack and multiple levels of "steps". Obviously SPS will be placed higher up and than LPS and z&p's. I'm new with the hydra's and LED's in general; I run T5's on my display. What light intensity should I start out on the Hyrda and how far up should I hang it?

Any suggestions are helpful! Thanks

350gt

Wed, 7th May 2014, 05:10 PM

6"-8"

I wouldnt put anything above 30% till u get a par meter and test....

Keep red/green/uv below 10%

aceer15

Thu, 8th May 2014, 08:34 AM

How can it get a hold of the groups par meter for testing?

Sent from my iPhone using Tapatalk

350gt

Thu, 8th May 2014, 08:39 AM

http://www.maast.org/showthread.php?t=79088

aceer15

Thu, 8th May 2014, 10:15 AM

Thanks 350!