View Full Version : leprechan gold chalice
Reef Swimmer
Fri, 29th Nov 2013, 08:23 PM
I got a frag of a leprechan gold chalice and it was doimg good for a while but in the past few days ive been having stuff knock it over face down when im at work and iys not lookinh so hot. Its receded from the outer edge of its skeleton to the middle and is not looking good at all. Ive been feeding cyclopez everyother day but i see not feeding tentacles coming out at all. What should i do.
Scutterborn
Fri, 29th Nov 2013, 08:41 PM
I would say move it to a little lower light and give it some time.
- Ben -
Reef Swimmer
Fri, 29th Nov 2013, 08:43 PM
I really hope it pulls out of this. Its a nice piece and its my favorite chalice.
Sent from my LG-E980 using Tapatalk
BBQHILLBILLY
Fri, 29th Nov 2013, 09:05 PM
Nice chalice. I hope it makes it. I have had success with chalices in the refugium.
Check with Sherita if she has some ideas. She allways has awesome chalices.
aquasport24
Fri, 29th Nov 2013, 09:23 PM
Check your water parameter and a water change is in order now. Good luck Shane.
BBQHILLBILLY
Fri, 29th Nov 2013, 09:29 PM
Its Davids chalice. I have a couple chalices too. Big fan of the chalices.
kkiel02
Sat, 30th Nov 2013, 12:25 AM
Yeah like others said. Low light and try and put a half coke bottle over the top then feed it. That way the current from the tank won't blow the food off. Chalices are pretty hardy so hopefully it will pull through.
Reef Swimmer
Sat, 30th Nov 2013, 10:21 AM
I turn the pumps off when i feed my corals for at least 45 min. Then just turn on my circulation pump then after an hr in turn on the return.
kkiel02
Sat, 30th Nov 2013, 12:03 PM
Ok that ought to be enough. Are you getting a feeding response at that time? It's probably just stressed from getting flipped over. Hopefully it's puffed up more today for ya. If not you might want to start thinking about dipping it but I bet it's stressed from the flipping.
Reef Swimmer
Sun, 1st Dec 2013, 11:11 PM
http://img.tapatalk.com/d/13/12/02/myzamy4a.jpgthis is my leprechan chalice
Sent from my LG-E980 using Tapatalk
Big_Pun
Sun, 1st Dec 2013, 11:19 PM
first off that looks like hollywood stunner, second you should glue it down. also it could be your parameters .
Reef Swimmer
Mon, 2nd Dec 2013, 04:53 AM
http://img.tapatalk.com/d/13/12/02/ereny3ep.jpgIt's glued down to a plug second I got a Hollywood stunner and they don't look the same. It came from that.
Sent from my LG-E980 using Tapatalk
Big_Pun
Mon, 2nd Dec 2013, 07:01 AM
i was looking at this http://www.pacificeastaquaculture.com/Leprechauns-Gold-Chalice-Wait-List-Prodview.html
Reef Swimmer
Mon, 2nd Dec 2013, 07:26 PM
Yeah I saw that chalice.
Sent from my LG-E980 using Tapatalk
Reef Swimmer
Fri, 6th Dec 2013, 11:16 PM
It's starting to look better.
Sent from my LG-E980 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.