Reef foundation pro test kit

[Thawk7464]

Can anyone help me understand how i should read the syringe for this test kit.

[allan]

10ml.... If 4ml is left, than you've used 6ml, look for that number on the card.

Draw fluid up to 10ml... The black plunger should rest against the number, not the fluid level. The air pocket that exists between the black plunger piece and the fluid represents the fluid that exists in the "needle" portion of the syringe.


Sent from my iPhone using Tapatalk

[Thawk7464]

Ok my problem is reading the 1ml syringe

[allan]

1ml
.95ml
.90ml
...
.65ml


.35ml used, check card.


Sent from my iPhone using Tapatalk

[Thawk7464]

Ok Allan you making me look dum now because you lost me

[Thawk7464]

Are you counting from the top were the 1ml start are is it from the bottom were its 0.1 I'm redoing the test now my end point is right above the 0.2 with two lines

[Zen Reef]

If I'm understanding correctly, above .2 with two lines is .22 meaning you used .78 of the 1ml total. Reference .78 to the card and that's where your ppm is at.

[Thawk7464]

So meaning when I'm testing I subtract what's left from 100. I should have just got the drops lol

[Zen Reef]

Yup. The test references how much you used. So take what's left and subtract from that from 100. It's pretty simple once you know what direction you're supposed to be reading.

[Big_Pun]

this may help


http://www.youtube.com/watch?v=VT9tEHp828w&safety_mode=true&persist_safet y_mode=1&safe=active

http://www.youtube.com/watch?v=bb4NnYOFneA&safety_mode=true&persist_safet y_mode=1&safe=active

[Thawk7464]

I got it now I was un sure

[Thawk7464]

Thanks guys