350 gallon L shaped glass tank

[Jolly]

350 tank for sale with custom stand and sump. I noticed a leak,so I drained it and put it on cinder blocks to find the leak. Now I can't find a leak at all. I have it about 3/4 full with my waste water out of my 300 and still not leaking. You can see the tank on my facebook (Johne Rodgers) video. I don't know how to post pictures, sorry. I'm not saying you won't see another tank like this, as far as footprint goes, but doubtful. It is 84.5" x 65" and 31" from top to bottom and fits nicely into a corner. Debbie says (2) 300 gallon tanks are tooooooooo much. $1,000.00 and you move it lol.(210)590-1775. NE San Antonio, Rolling Oaks Mall

[BBQHILLBILLY]

Thats a sweet looking tank. Ive seen it. You got to get some pics and show it off.
I was looking at the facebook page and I couldnt find the video.

[koa25]

I'm assuming i found the right johne rodgers on facebook with an L shaped tank. There were only two.
14931

[BBQHILLBILLY]

Thats it. Nice.

[koa25]

Not gonna lie. If i had a grand i would be all over that in a heart beat.

[Jolly]

that's the right one, thanks for looking it up and posting for me

[koa25]

You're more than welcome. I was curious so i looked it up. Thought I'd be nice and post it. Too nice not to be seen. Anyone have a grand i can borrow? Ha ha.

[TexasTodd]

That's a lot of seams! Who made the tank and how old is it? What volume was the leak and where did you notice it?

[350gt]

That is awesome.......

[allan]

Jolly, can't believe you're giving up the tank.

...if only that decimal point was over by just one 0. :(

[Jolly]

lol, the tank was made by Deutch Aquatic Systems in Dallas. It is 12 years old. When the tank was on the stand, I noticed there was a drip on on the back side, of course, and I couldn't locate it. I drained the tank and have it setting on cinder blocks in the middle of the Tiki room, with about 250 gallons of waste water from my other tank. I've had the tank since 06. I don't know if the tank was leaking or perhaps the plumbing, but for the life of me it has not leaked a drop since I put it in the middle of the floor. I had the stand made at the cabinet shop on Redland rd. just North of 1604. The sump is a wet/dry made by ..... you guessed it Ace. If someone is serious, I might be able to add some extras.

[Jolly]

Allan I still have the 300 LOL

[Jolly]

I was going to surprize the buyer, but everything that was under it goes with it too! Euroreef skimmer, 1/2 horse power chiller, pump, and ultra violet light.

[allan]

*groan*

I told my wife that I won't go any bigger than the 190...

Not a lier
Not a lier
Not a lier

:)
Sweet deal

[TexasTodd]

I'll help you move it Allan.....ONCE, none of this there, then to the living room FLOOR and back.

[allan]

LOL, I still you remember you yelling at Kevin to "GET THAT DANMED 2 X 4 UNDER THAT CORNER! THE CORNER! RIGHT THERE! UNDER THE CORNE--"

I believe that you gave up and let the tank go to do it yourself, right?

[Jolly]

not to mention all the rock and sand that goes with it, someone, whom ever better bring a 16 ft trailer, it took a lot of rock and sand to fill this puppy up, lol

[BBQHILLBILLY]

84.5" x 65" and 31"

If Im not mistaken the tank is 7ft at the longest side of the L. The other side of the L is just more than 5ft?

just curious. Can you get this tank through a single door or do you need a double door?

[Jolly]

Hi BBQ, The tank is 31" deep and if you take the door off the hinges it will fit thru a 32" front or back door, however most interior doors are 30" if I'm not mistaken. We came in thru the front tiki room door and not the sliding glass door in the rear. You're right about it being a little over 5" on the short leg and 7" on the long leg. This price also includes all the sand and rock(26 buckets if I counted right), uv sterilizer, euro reef protein skimmer, iwaki pump, and a 1 horsepower chiller. I would bring extra buckets if you got them, the sand is heavy

[reefreak]

Man I love the sola tubes lmk if you want to get rid oftjem and pm me a price

[allan]

Man, Jolly, You've sweetened this sale to the point where I'm completely flabbergasted as to why no one has picked it up.

I literally broke into a sweat trying to figure out whether I should spend my hardly earned $1k on a lift kit for my truck, or that tank. Put my belly into knots... with shaking hands I called and ordered the lift kit, but now feel like I missed out.

I keep whispering to the picture of the tank saying "We could create such magic, you and I." *sigh*

[350gt]

Lift kits will always be there.... A tank like this won't... Well at that price...

[Gseclipse02]

Man, Jolly, You've sweetened this sale to the point where I'm completely flabbergasted as to why no one has picked it up.

I literally broke into a sweat trying to figure out whether I should spend my hardly earned $1k on a lift kit for my truck, or that tank. Put my belly into knots... with shaking hands I called and ordered the lift kit, but now feel like I missed out.

I keep whispering to the picture of the tank saying "We could create such magic, you and I." *sigh*


Just get the guys at line x to do a leveling kit 400 bucks and its got a little lift look

[allan]

Jolly,

Quick question, wife seems happy, going to stop by this evening if that's cool with you.

The question, is the chiller a full horse or half a horse? I noticed that you said half earlier, and full later.

[koa25]

Lift and a tank? Nonsense... I'll help move it


Jolly,

Quick question, wife seems happy, going to stop by this evening if that's cool with you.

The question, is the chiller a full horse or half a horse? I noticed that you said half earlier, and full later.

[allan]

Gather your friends Mike, I've seen your arms and I fear that we will need more to help. :-)

[hobogato]

i beleive the chiller is a coralife aquachill 1 hp.

[koa25]

Gather your friends Mike, I've seen your arms and I fear that we will need more to help. :-)

Low blow Allan, Low blow. PT stud here. Remember that. I'll carry the little stuff then... Not everyone was 6ft tall at 10 years old guy.:sarcastic:

[allan]

lol, nothing but respect dude. I'm just playing, I'm sure you're good for a couple hundred pounds of lift. :D

Thanks Ace,

finger is on the trigger.

[koa25]

lol, nothing but respect dude. I'm just playing, I'm sure you're good for a couple hundred pounds of lift. :D

Thanks Ace,

finger is on the trigger.
Ha ha, i know no worries. I got my other skills. I'm not a ninja like yourself. But i hold my own. You'll see when it comes to the lift. Jack of all trades master of none. Well, I'm a master debater...:shades:

[koa25]

finger is on the trigger.

Cause I know every NCO current or prior loves this line. You won't do it Battle.

[Mr Cob]

trigger pulled yet on this one?

[allan]

Ha ha, i know no worries. I got my other skills. I'm not a ninja like yourself. But i hold my own. You'll see when it comes to the lift. Jack of all trades master of none. Well, I'm a master debater...:shades:

Ha! you put a de in there...

Not yet Rob, wifey and I are going to go up there today. Waiting to see how it pans out.

[Scutterborn]

I'm thinking of your front entryway and this tank. My back is starting to hurt already!! Lol!! I'll lend a hand. I have a truck too.

[koa25]

Ha! you put a de in there...

Not yet Rob, wifey and I are going to go up there today. Waiting to see how it pans out.

Had to keep it pg. This is a family site.

[allan]

Definitely go through the back door.

[Jolly]

Sale pending, on approval of "home" finance OFFICER, lol

[koa25]

Definitely go through the back door.

So many jokes with this comment.

[Milly]

OMG you and mom should get this tank. I'll give her a long back massage and try and talk her into it some more :).

[TexasTodd]

And sweep dog hair/clean base boards for a month Milly??? :)

[Milly]

And sweep dog hair/clean base boards for a month Milly??? :)

This just proves how well you know my mom. She looooooves clean base boards!

[allan]

What threw her over the edge was the message, milly.

Lucky,
Perhaps I will do that, Allan's rebuild on post 201.

[reefreak]

Which tanks coming down

[allan]

Eventually both, but immediately the frag tank.

Just need to put up the metal halide in the fuge to take the frags from the smaller tank.

[koa25]

Triggers pulled huh? Awesome. Looking forward to that build. Let me know about the 190when it comes up. I love the foot print.

[Jolly]

Going, going, going, GONE, Thanks Allen. koa25, thanks for posting the tank for me, one of these days I'll learn. jolly

[koa25]

More than welcome jolly. My pleasure to help out.