Flush RODI

[roscozman]

We have had our system for some time and want to flush it out. I have since lost the instructions. We have a PurleyH2O system with flush kit.

Anyone have this RODI Unti and know how to run the flush kit?

[JimD]

If its a typical flush kit, you simply open the valve, (should be located on the waste line) and let it run for 20 minutes or so...

[Pennies2Cents]

If its a typical flush kit, you simply open the valve, (should be located on the waste line) and let it run for 20 minutes or so...

Hey Jim, Thanks, We will give it a try tonight... :bigsmile: There are 2 extra white hoses from the top membrane does the kit attach to these some how?

[JimD]

The flush kit should bypass the flow restrictor which is located in the waste line, you may need to relocate the restrictor so that its flow is redirected by the valve... Make sense? I take it the flush kit isnt already installed?

[Big_Pun]

if not give me a call if its not installed or cant figure it out ill come by and help you know im up late

[Pennies2Cents]

Flush kit is already installed on the waste line. When it was first installed, we had to flush it and Ross thought the kit went to another line:at_wits_end:.. We have Chris' number and will call him. Thanks all. :)