Chiller installation question

[Ed]

The chiller is an Aqualogic drop in, so the coil is in the sump already. I have searched Aqualogic's site (since I have no manual) but have not found the answer - maybe it's there, just haven't found it.

Where do you put the temperature probe from the controller? In the sump? In the main tank?

Thanks for the help.

[Texreefer]

Ed, I mailed the papers to you a while back. I wonder why you didn't get it, and I have not received them back:confused:
anyway, you can pretty much place it anywhere is convenient for you. just not right after the coil.. I had it placed in the overflow where the water returns from the tank

hope that helps

[BIGBIRD123]

It does need to be in the tank somewhere, the overflow would be the least intrusive. You are trying to cool the tank water not the sump water.

Steve

[Texreefer]

It does need to be in the tank somewhere, the overflow would be the least intrusive. You are trying to cool the tank water not the sump water.

Steve

I agree, however i ran this chiller for two years with the probe in the sump with not a single issue

[Ed]

Thanks Mike and Steve!

I'll put it in the overflow.

Mike,

No biggie on the paperwork. With our mail service, there is no telling, I did d/l and print what was available on the website, but it didn't explain probe placement.