javajaws
Mon, 23rd Jun 2008, 03:21 PM
This is everything I have left from the tank I just broke down. Everything except the Sequence is in great working order:
H&S A150-F2001 skimmer - $450
Iwaki MD30RLXT - $120
10lb Aluminum CO2 cyclinder - $60
Tunze Nanostream 6025 - $40
Reef Fanatic Level Controller - $40
2 x ViaAqua Titanium Heaters - $20 (for both)
Pinpoint ph monitor - $40
Refractometer - $30
Eheim automated feeder - $20
2 x Azoo click on dual fans units - $10 for a used one, $20 for a new/unused one
TLF Phosban reactor - $20
Mag 5 pump (used for water changes) - $30
Mag-Float 350 - $10
Sequence 3200SEQ21 pump. 1/8 hp Baldor motor, 2590 gph at 4.4 ft, 213 max watts. 1.5 inlet and outlet. All stainless steel hardware. Needs a new main seal (can be bought for 50 dollars) - $140
Blue Wave 7 dual 250w HQI MH ballast + 2 x Sunlight Supply ROIII reflectors + 2 x 250w Phoenix 14k bulbs (appx 6 months old) - $300
Pinpoint pH Controller + pH Probe + large containers of pH calibration solution - $100
Set of test kits, most of these are pretty new and have lots of tests left:
(LaMotte Alk, D-D phosphate, Salifert KH, MG, NO3, CA) - $50 for all
110g Inwall tank, euro-braced, 2-side low-iron (front and back), 12 holes predrilled on ends. Includes overflow and all bulkheads (8 1" sched 80, 4 1.5" sched 80), and even around 8 true union 1" ball valves - the good ones). Search for "12-hole inwall" on reef central for pics). $200
Acrylic sump (1/2" acrylic, euro-braced, 3 baffels), large enough for a 120g tank - $100
- Jason
H&S A150-F2001 skimmer - $450
Iwaki MD30RLXT - $120
10lb Aluminum CO2 cyclinder - $60
Tunze Nanostream 6025 - $40
Reef Fanatic Level Controller - $40
2 x ViaAqua Titanium Heaters - $20 (for both)
Pinpoint ph monitor - $40
Refractometer - $30
Eheim automated feeder - $20
2 x Azoo click on dual fans units - $10 for a used one, $20 for a new/unused one
TLF Phosban reactor - $20
Mag 5 pump (used for water changes) - $30
Mag-Float 350 - $10
Sequence 3200SEQ21 pump. 1/8 hp Baldor motor, 2590 gph at 4.4 ft, 213 max watts. 1.5 inlet and outlet. All stainless steel hardware. Needs a new main seal (can be bought for 50 dollars) - $140
Blue Wave 7 dual 250w HQI MH ballast + 2 x Sunlight Supply ROIII reflectors + 2 x 250w Phoenix 14k bulbs (appx 6 months old) - $300
Pinpoint pH Controller + pH Probe + large containers of pH calibration solution - $100
Set of test kits, most of these are pretty new and have lots of tests left:
(LaMotte Alk, D-D phosphate, Salifert KH, MG, NO3, CA) - $50 for all
110g Inwall tank, euro-braced, 2-side low-iron (front and back), 12 holes predrilled on ends. Includes overflow and all bulkheads (8 1" sched 80, 4 1.5" sched 80), and even around 8 true union 1" ball valves - the good ones). Search for "12-hole inwall" on reef central for pics). $200
Acrylic sump (1/2" acrylic, euro-braced, 3 baffels), large enough for a 120g tank - $100
- Jason