PDA

View Full Version : Sprung A Leak! Help!



Pennies2Cents
Sat, 17th May 2008, 10:17 PM
Okay as if the problem with the skimmer is not enough. :at_wits_end: Now the tubing from the overflo box to the sump which is down in the cabinet of the the stand, has sprung a leak,:eek: not a big one but enough to notice that the carpet was wet! What can I do to fix it? Is that tube replaceable? Please help!:nailbiting:Thanks,

BigKGlen
Sat, 17th May 2008, 10:21 PM
For tonight, lather on some silicon. Get a new one tomorrow.

HTH

aquasport24
Sat, 17th May 2008, 10:30 PM
turn off the return pump til' you have it fix. and wipe the wood real good so water won't soak in.

Darth-Tater
Sun, 18th May 2008, 05:50 AM
I have several tubes that might work. Call me on Sunday and and I will swing by and see if any of them work. If so you can have it.

David
681-3088

Mr Cob
Sun, 18th May 2008, 09:36 AM
How's it going? Got an update for us? Good luck. I know leaks can be very frustrating and my entire plumbing system for the return is completing cemented together because of 4 various leaks.

If your budget allows for it do not do what I did and be sure to replace faulty equipment.

Darth-Tater
Sun, 18th May 2008, 05:08 PM
Got back about an hour agofrom Eve's house. Gave them another hose. They should be up and running.

Tater

Pennies2Cents
Sun, 18th May 2008, 05:57 PM
After a long worrisome night, our problem has been fixed. A special thank you to Darth-Tater, who saved us..:bigsmile:.

Ross & I would like to thank all of you who gave us ideas. On what to do, and how to fix the problem..

THANKS:bighug:

Mr Cob
Mon, 19th May 2008, 10:00 PM
After a long worrisome night, our problem has been fixed. A special thank you to Darth-Tater, who saved us..:bigsmile:.

Ross & I would like to thank all of you who gave us ideas. On what to do, and how to fix the problem..

THANKS:bighug:

Great!